Cruise Control

Shaker · 18th March 2015, 09:08

I'm not sure if anyone can help me but I'll ask here anyway.
Apart from the ZT & ZTT I have, I've also got a ZS180 would it be possible to fit the cruise control from a V6 75 or ZT to the ZS i.e. use all the parts (except the steering wheel controls as the wheel is smaller on the ZS).
Any info would be appreciated. Thanks Steve

2.2-600-vtec · 18th March 2015, 09:54

easiest thing with the zs is a setup from a 400gsi and fit a zt throttle body with the extra cable run for cruise

Shaker · 18th March 2015, 15:52

Quote:

Originally Posted by 2.2-600-vtec

easiest thing with the zs is a setup from a 400gsi and fit a zt throttle body with the extra cable run for cruise

Thanks for the reply, will the parts from the V6 75/ZT not work/fit then? I'm going to guess the 400 Gsi parts are going to be hard to find.

2.2-600-vtec · 18th March 2015, 16:07

If it goes anywhere near the canbus system then it won't work, 400 gsi parts are rare but as long as you get the steering wheel controls and interface then I think the early rangerove pump and valve pack will work,

I have a 420gsi bubble shape steering wheel interface and control box complet on a bracket, I just don't have the pump valve pack, clutch switch or steeringcontrols as I left it on the car I started to retrofit ( now my dads cars) i still have i think the vac bellows but i guess the zt75 one would be a better fit on the v6 anyway.

18th March 2015, 09:08	#1
Shaker Avid contributor ZT 260 SE, ZT-T 135+, ZT 160+1.8T, ZS180, ZR115+, 07 2.5 Connie SE Join Date: Jun 2008 Location: Macclesfield Posts: 183 Thanks: 27 Thanked 7 Times in 7 Posts	Cruise Control I'm not sure if anyone can help me but I'll ask here anyway. Apart from the ZT & ZTT I have, I've also got a ZS180 would it be possible to fit the cruise control from a V6 75 or ZT to the ZS i.e. use all the parts (except the steering wheel controls as the wheel is smaller on the ZS). Any info would be appreciated. Thanks Steve __________________ V8.... Everything else is just a toy!!!

18th March 2015, 09:54	#2
2.2-600-vtec Loves to post mg ztt Join Date: Oct 2014 Location: Exeter Posts: 328 Thanks: 2 Thanked 37 Times in 35 Posts	easiest thing with the zs is a setup from a 400gsi and fit a zt throttle body with the extra cable run for cruise

18th March 2015, 16:07	#4
2.2-600-vtec Loves to post mg ztt Join Date: Oct 2014 Location: Exeter Posts: 328 Thanks: 2 Thanked 37 Times in 35 Posts	If it goes anywhere near the canbus system then it won't work, 400 gsi parts are rare but as long as you get the steering wheel controls and interface then I think the early rangerove pump and valve pack will work, I have a 420gsi bubble shape steering wheel interface and control box complet on a bracket, I just don't have the pump valve pack, clutch switch or steeringcontrols as I left it on the car I started to retrofit ( now my dads cars) i still have i think the vac bellows but i guess the zt75 one would be a better fit on the v6 anyway.