|
||
|
5th May 2013, 07:16 | #1 |
Avid contributor
mg zt 2.5 v6 Join Date: Feb 2012
Location: huntingdon
Posts: 117
Thanks: 0
Thanked 0 Times in 0 Posts
|
kenwood head unit 2.5
Hi can you advise me
My steeriing controls are not working If I remember is there a wire that acts like a ariel for remote steering controls Also how do I get at the controls Many thanks |
5th May 2013, 08:14 | #2 |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
The ZT with a Kenwood stereo uses infra-red for the steering wheel controls. The LED is on the end of a cable and should be clipped under the eyebrow so that it can be seen by the stereo, a common problem is that it has moved, or something on the shelf is blocking the view.
You can test the system by looking at the LED through a digital camera/phone camera while pressing the steereing wheel switches. |
5th May 2013, 08:47 | #3 |
I really should get out more.......
BMW 1 series Join Date: Oct 2008
Location: Bolton
Posts: 2,094
Thanks: 12
Thanked 40 Times in 36 Posts
|
The remote wouldn't work when I fitted my kenwood to my car and it was down to the fact that the infra red thingy was poking out of the right hand side hole of the eye brow so just swapped it to the left hand hole and hey presto.
My first zt the remote wouldn't work though because one of the wires had broken off the infra red so had to join it back together. Either of these could be your problem. |
5th May 2013, 19:54 | #4 |
Avid contributor
mg zt 2.5 v6 Join Date: Feb 2012
Location: huntingdon
Posts: 117
Thanks: 0
Thanked 0 Times in 0 Posts
|
kenwood head unit
Kenwood head unit
Hi what is the eyebrow you mentioned |
5th May 2013, 20:24 | #5 |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
It's the curved bit of trim that sticks out above the stereo & shelf, the LED should be on the underside so it shines down onto the stereo.
|
5th May 2013, 20:40 | #6 |
Avid contributor
mg zt 2.5 v6 Join Date: Feb 2012
Location: huntingdon
Posts: 117
Thanks: 0
Thanked 0 Times in 0 Posts
|
Cheers ray
|
5th May 2013, 20:46 | #7 |
Avid contributor
mg zt 2.5 v6 Join Date: Feb 2012
Location: huntingdon
Posts: 117
Thanks: 0
Thanked 0 Times in 0 Posts
|
cd changer kenwood
Hi guys thinking of taking my cd changer out my 1.8 and fitting in my 2.5
Same head unit but cd in the 2.5 Looked in the 1.8 cable to cd changer is in the boot but not in the 2.5 Can I remove the cable out the 1.8 to fit in the 2.5 Where is it routed to the front Many thanks |
|
|