retrofitting front fogs

[HarleymanFXD]

I want to upgrade my 04 classic CDT by fitting front fog lights, perhaps rather naively I though it was just a case of getting a second hand switch cluster and a couple of fog lights and plugging everything in!

I am begining to realise that on a 75 nothing is that straight forward. Has anyone done this conversion, and if so what do I need to do?

Is the light switch configured to the car it is from as suggested in the earler thread below?

http://www.the75andztclub.co.uk/foru...ight=front+fog

[T-Cut]

The OEM foglamps kit contains the two lamps, a wiring loom, a relay, a replacement switch module (has a split front/rear foglamps button), some cable ties, a pair of replacement bezels (Mark 1 models only), six self-tappers, six screw clips (Mark 1 only) and an instruction leaflet.

The switch unit is just the front bezel/buttons/thumb wheel adjuster and is a direct replacement for the old one. The electronics part of the module (containing the data backup) isn't replaced.
The relay plugs into a blank space in the under-bonnet fuse box. The loom connects to each lamp, an earth point and to the large multi-socket that plugs into the fuse box. One of the existing wires in this plug is removed, tied back and replaced from the new loom.

Without the instructions it's impossible to figure out.

TC

[m200k]

Originally Posted by T-Cut

The OEM foglamps kit contains the two lamps, a wiring loom, a relay, a replacement switch module (has a split front/rear foglamps button), some cable ties, a pair of replacement bezels (Mark 1 models only), six self-tappers, six screw clips (Mark 1 only) and an instruction leaflet.

The switch unit is just the front bezel/buttons/thumb wheel adjuster and is a direct replacement for the old one. The electronics part of the module (containing the data backup) isn't replaced.
The relay plugs into a blank space in the under-bonnet fuse box. The loom connects to each lamp, an earth point and to the large multi-socket that plugs into the fuse box. One of the existing wires in this plug is removed, tied back and replaced from the new loom.

Without the instructions it's impossible to figure out.

TC

Hi there does anyone have the instructions for fitting these fog lights as ive fitted mine and i cant get them to work and am at a loss as to what to do now, thankyou

[T-Cut]

Originally Posted by m200k

Hi there does anyone have the instructions for fitting these fog lights

OK, just for you . . .

Note the page numbering. This came from the standard MGR installation booklet.

[PaulPJ]

Hi Chaps, where can I get one of these kits as I would like to fit them to my 52 reg CDT and how much are they. Paul

[steve107]

i got every thing off ebay plus the front full wiring harness .i found it easy to fit the full harness instead of the fog light loom .as you just swop the switch front put relay in fuse box .they worked straight away. i have a spare front harness if any one wants it for just pp.you have to get the fog lights to fit the harness as there is two types mine was a 52 cdt tourer

[doublekite]

Originally Posted by steve107

i got every thing off ebay plus the front full wiring harness .i found it easy to fit the full harness instead of the fog light loom .as you just swop the switch front put relay in fuse box .they worked straight away. i have a spare front harness if any one wants it for just pp.you have to get the fog lights to fit the harness as there is two types mine was a 52 cdt tourer

PM sent Steve.

[JohnDotCom]

Try Les at SMC Trading and Messenger for recycled ones
or XPart Parts suppliers for new.

XBQ000010 Kit-front lighting fog lamp £176.24 + VAT