|
||
|
4th November 2019, 15:13 | #1 |
Regular poster
Rover 75 Saloon Join Date: Jan 2016
Location: Gargrave, Nr. Skipton, North Yorkshire
Posts: 98
Thanks: 33
Thanked 31 Times in 15 Posts
|
Ignition Key Difficult to get in the lock.
This has been happening off and on just recently, you can't push the key into the barrel, just solid won't go in, then keep trying and it goes in. The next time will be okay, but the problem returns randomly. Any ideas ?
Phil |
4th November 2019, 15:42 | #2 |
Loves to post
Rover 75 CDT Connoissuer SE Join Date: Dec 2013
Location: Hereford
Posts: 273
Thanks: 161
Thanked 100 Times in 47 Posts
|
You could try rubbing a soft grade pencil tip up and down the key blade. It worked for me, as the graphite eases insertion.
__________________
This isn't just a car, this is a Rover 75 … |
4th November 2019, 16:33 | #3 |
This is my second home
ZT260 #243 (resting) Join Date: May 2010
Location: Prestonpans
Posts: 22,484
Thanks: 650
Thanked 4,624 Times in 3,358 Posts
|
Oh Matron!
I used to have it where occasionally I couldn't turn the key unless I moved the steering wheel due to the steering lock being engaged, wonder if it could be similar here. Next time the key won't go in try moving the steering wheel. |
4th November 2019, 19:07 | #4 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
The graphite is a good idea But------------It's probably the spring loaded tumblers that are sticking.
You need a liquid lubrication like WD 40 that will run down around the spring plungers and unstick them.-- |
4th November 2019, 19:17 | #5 |
This is my second home
ZT260 #243 (resting) Join Date: May 2010
Location: Prestonpans
Posts: 22,484
Thanks: 650
Thanked 4,624 Times in 3,358 Posts
|
Wouldn't advise WD40 as it can attract dirt and gum up a lock.
|
4th November 2019, 19:26 | #6 | |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
Quote:
Personally I have, over time, unstuck lots of things that have stayed un-stuck using WD 40.--The main thing to keep it off is anything with pure rubber in as opposed to synthetic stuff. Pure rubber swells up..-- Over here in France I have bought a couple of spray cans that appear to have a very light oil in them coupled with Graphite. The oil seems to almost vanish leaving a semi-dry lubricant in the exact place you want it to be. Might be on sale too in the UK. Last edited by COLVERT; 4th November 2019 at 19:30.. |
|
4th November 2019, 20:05 | #7 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,772
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
Graphite powder and white grease is the correct method.
__________________
Lest we forget..
|
4th November 2019, 22:28 | #8 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
You need something that acts like Wax-Oil. Flows into where it's needed then semi-sets. Graphite powder and white grease won't flow. They need something like the pressure of a grease gun to get where they are needed.
You won't have much luck with an ignition lock unless you use a grease gun.----------- You only have to look at a cross section through the ignition lock to see what I mean. Those plungers and springs need liquid lubrication.--- That white grease is great on boats as it's waterproof. Used it for over 20 years of boating off Teignmouth in south west Devon in my sea fishing days. Prop shaft seals, pulleys and cables etc. Better off with LMH grease in car applications. Wheels ,bearings, bonnet cables etc. Last edited by COLVERT; 4th November 2019 at 22:33.. |
5th November 2019, 08:43 | #9 |
Gets stuck in
None at the moment Join Date: Jan 2018
Location: Hereford
Posts: 501
Thanks: 1
Thanked 165 Times in 146 Posts
|
I would take the lock barrel out & give it a good wash & blow out with an airline, that what I did with mine . I found it better just dry and clean. I seem to remember one needed to take off the cowling, prise off the transponder coil , and the barrel will come out with the key in the first position using a straightened paper clip pushed down the small hole at the edge of the barrel which then releases it.
On another 75 I had a new barrel supplied through XPart coded from the vehicle VIN to the existing key, so I didn't end up with a mismatched set of keys. Last edited by RoverP480; 10th January 2020 at 07:37.. |
9th January 2020, 12:51 | #10 |
Newbie
Rover 75 Tourer Join Date: Aug 2010
Location: Waterlooville
Posts: 15
Thanks: 1
Thanked 0 Times in 0 Posts
|
Ignition Lock Out V6
Much the same with me as I cant seem to get key in to my ignition of my 2002 V6 that had done 86K mls. Wondered if any thing to do with flashing red light on dash. I have disconnected the battery for 30 mins but no difference.Thanks for previous help. Bruno
|
|
|