|
||
|
8th September 2013, 00:04 | #1 |
Newbie
MG ZT190 Join Date: Mar 2013
Location: Cardiff
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Parking. sensors
Parking sensors.
I have after market sensors i wish to fit to my zt. Four rear two front. I have the plug and play in boot my question is that i need reverse brake and 12v supply. I know the reverse is there but is there a twelve v and brake in the plug if so which ones will be a lot more tidy if i can break into the plug wiring instead of the lights and towbar live |
8th September 2013, 07:22 | #2 |
I really should get out more.......
Rover 75 Join Date: Jul 2012
Location: Willenhall
Posts: 2,897
Thanks: 181
Thanked 340 Times in 264 Posts
|
Green/brown is reverse lamp wire, Green/Blue is brake lamp wire. For permanent 12v I would tap into the tow bar 12v
My after market system was easy. 12v hooked up to reverse light and a ground wire so it only comes on when in reverse the other wires were the sensors. John
__________________
Regards John [SIGPIC][/SIGPIC] My 75's General Information:
|
8th September 2013, 12:05 | #3 |
Newbie
MG ZT190 Join Date: Mar 2013
Location: Cardiff
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks john.
Reverse and Brake, were the ones i needed to double check.Live and earth are there for the towbar anyway |
|
|