Ultrasonics ?

Lates · 20th May 2007, 13:13

Afternoon gents,
Doing a bit of digging about to find out if ultrasonics can be retrofitted to the 75/ZT. Fitted to the top of the o/s B post when in the vehicle.

One question I need to know is if your 75/ZT has no sensor fitted can somebody carefully lower their headlining to see if the multiplug is there. I have a sensor just need to know if the loom is there prior to cutting holes in the material.
Muchos gracias peeps.

Tatts · 20th May 2007, 13:30

Just had a quick look by pulling the plastic jobby away that the seat belt runs through, and I couldn't see anything.

Lates · 20th May 2007, 13:55

Think it will run along the roof Mr Tatts.

Mike · 20th May 2007, 15:37

iirc it was never part of the standard roof loom - as with the sunroof power lead and phone mic lead they were often add on's. Most likely not there Lates

hth

Mike

Moonstone · 21st May 2007, 17:57

Haynes' circuit diagram shows the U/S module connected to pins a15,a31 on the BCU, if you're able to check that. Also shows earth lead to base of RH A pillar.

Lates · 21st May 2007, 19:53

Ah ha maybe getting somewhere, where is keith when you need an electrickery expert

Keith · 21st May 2007, 21:30

Busy doing stuff!
Actaully I was out playing with the Black thing

Just answered your PM on this, I am not to sure, Its not a T4 thing afaik so not sure how it works if you have one there is no need to conect it up in the roof to test why not just connect it to the BCU and leave on the seat then creep up from behind and go

BOO!

Lates · 21st May 2007, 21:34

A plan is afoot, any donors wishing to be guinea pigs

Mike · 21st May 2007, 22:28

Quote:

Originally Posted by Lates

A plan is afoot, any donors wishing to be guinea pigs

Depends when you need it mate - am off to Luxembourg this w/e but may have a reason or two to visit soon

Lates · 21st May 2007, 22:41

Absolutely no rush Mr Mike, sensor is here if needs be I can solder on some fly leads and send it to keith for evaluation lol

20th May 2007, 13:13	#1
Lates This is my second home Jaguar XE Join Date: Nov 2006 Location: Coventry Posts: 4,321 Thanks: 56 Thanked 59 Times in 55 Posts	Ultrasonics ? Afternoon gents, Doing a bit of digging about to find out if ultrasonics can be retrofitted to the 75/ZT. Fitted to the top of the o/s B post when in the vehicle. One question I need to know is if your 75/ZT has no sensor fitted can somebody carefully lower their headlining to see if the multiplug is there. I have a sensor just need to know if the loom is there prior to cutting holes in the material. Muchos gracias peeps.

20th May 2007, 15:37	#4
Mike This is my second home Rover 75 V8 Join Date: Oct 2006 Posts: 3,448 Thanks: 0 Thanked 206 Times in 32 Posts	iirc it was never part of the standard roof loom - as with the sunroof power lead and phone mic lead they were often add on's. Most likely not there Lates hth Mike __________________ Mike [SIGPIC][/SIGPIC]

20th May 2007, 13:30	#2
Tatts This is my second home MG6 TL Join Date: Nov 2006 Location: Tarn Posts: 5,269 Thanks: 2 Thanked 46 Times in 37 Posts	Just had a quick look by pulling the plastic jobby away that the seat belt runs through, and I couldn't see anything.

20th May 2007, 13:55	#3
Lates This is my second home Jaguar XE Join Date: Nov 2006 Location: Coventry Posts: 4,321 Thanks: 56 Thanked 59 Times in 55 Posts	Think it will run along the roof Mr Tatts.

21st May 2007, 17:57	#5
Moonstone Loves to post Rover 75 Tourer Join Date: Nov 2006 Location: Scotland Posts: 412 Thanks: 0 Thanked 1 Time in 1 Post	Haynes' circuit diagram shows the U/S module connected to pins a15,a31 on the BCU, if you're able to check that. Also shows earth lead to base of RH A pillar.

21st May 2007, 19:53	#6
Lates This is my second home Jaguar XE Join Date: Nov 2006 Location: Coventry Posts: 4,321 Thanks: 56 Thanked 59 Times in 55 Posts	Ah ha maybe getting somewhere, where is keith when you need an electrickery expert

21st May 2007, 21:30	#7
Keith This is my second home ZT400 Join Date: Oct 2006 Location: Ellesmere Posts: 5,948 Thanks: 0 Thanked 43 Times in 29 Posts	Busy doing stuff! Actaully I was out playing with the Black thing Just answered your PM on this, I am not to sure, Its not a T4 thing afaik so not sure how it works if you have one there is no need to conect it up in the roof to test why not just connect it to the BCU and leave on the seat then creep up from behind and go BOO!

21st May 2007, 21:34	#8
Lates This is my second home Jaguar XE Join Date: Nov 2006 Location: Coventry Posts: 4,321 Thanks: 56 Thanked 59 Times in 55 Posts	A plan is afoot, any donors wishing to be guinea pigs

21st May 2007, 22:41	#10
Lates This is my second home Jaguar XE Join Date: Nov 2006 Location: Coventry Posts: 4,321 Thanks: 56 Thanked 59 Times in 55 Posts	Absolutely no rush Mr Mike, sensor is here if needs be I can solder on some fly leads and send it to keith for evaluation lol