|
||
|
9th November 2018, 10:26 | #1 |
Banned
rover 75 saloon Join Date: Oct 2015
Location: workington
Posts: 1,890
Thanks: 385
Thanked 449 Times in 279 Posts
|
Air bag light fix
Ever since iv put different seats in the car the air bag light is on,I presume it's one of the front seat sensors but how do I rectify the problem so it goes out,Mot due in a month so need it sorted asap.
|
9th November 2018, 10:37 | #2 |
Avid contributor
Rover 75 connoisseur se Join Date: Nov 2011
Location: Wallington
Posts: 180
Thanks: 6
Thanked 11 Times in 10 Posts
|
On mine it was the connector, looked alright but fixed with liberal application of contact cleaner/lubricant
|
9th November 2018, 12:01 | #3 |
Gets stuck in
ROVER Join Date: Sep 2008
Location: Vera
Posts: 746
Thanks: 56
Thanked 111 Times in 85 Posts
|
I found the problem on mine was the pre tensioner connector so cut it off and soldered instead.
|
9th November 2018, 21:20 | #4 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
Cutting the connectors off and soldering isn't necessary and makes life difficult if for any reason you have to remove the seats.
Usually all that's needed is to unplug and plug them in s few times, did that today on a customer's car and the airbag light went out Makes sure also that the connectors are secured properly to the seat frame so they don't get caught by passengers feet or drag on the carpet which also causes problems. Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
Thread Tools | |
Display Modes | |
|
|