DanBMXes zt 160

[danbmx_69]

i have had some one ask me for a list of bits for the intercooler install

here is the intercooler I used
UNIVERSAL FMIC FFRONT MOUNT TURBO INTERCOOLER 550mm x 140mm x 65mm, S

form dcmotorsportuk ebay

heres the link, I know it wont stay active for long
http://www.ebay.co.uk/itm/FMIC-FFRON...item20c4fcffb0


you need one Silicone Polyester Reinforced Hose - 90 Degree Elbow Reducer - 76mm to 51mm (order code P SNR 070 051 K)

http://www.autosiliconehoses.com/sil...5-colours.html

one Silicone Polyester Reinforced Hose - 51mm - 45 Degree Elbows(order code P SSE 045 051 K)
http://www.autosiliconehoses.com/sil...5-colours.html

three Silicone Polyester Reinforced Hose - 51mm - 90 Degree Elbows (order code P SSE 090 051 K

http://www.autosiliconehoses.com/sil...5-colours.html

one 51mm - 2" - Silicone Polyester Reinforced Hose - 1 Metre Length(order code P SSH 051 K

http://www.autosiliconehoses.com/sil...5-colours.html

two Silicone Polyester Reinforced Hose - 90 Degree Elbow Reducer - 57mm to 51mm (order code P SNR 057 051 K)

http://www.autosiliconehoses.com/sil...5-colours.html

one 90° Degree Alloy Elbow - Polished Aluminium Bend Pipe Joiner(order code AHE 090 051)

http://www.autosiliconehoses.com/all...nd-joiner.html

two Alloy Polished Pipe 51mm - 1 Metre Length - Choose Your Size(order code APT 051)

http://www.autosiliconehoses.com/all...your-size.html

that's every thing you need for the install the only other thing you need is to make your own mouting brackets to fix the intercooler, if any one needs any help working out where it all goes I will try and do a write up if needed

[danbmx_69]

fitted this today
uploadfromtaptalk1407596676747.jpg


uploadfromtaptalk1407596711439.jpg


also been busy getting both cars ready for the gnoll park show in Neath tomorrow, anyone going?
uploadfromtaptalk1407596724315.jpg

[Jakey010]

10/10 on this thread I've spent the last few hours reading through it, you've done a beautiful job on the whole car!

Plenty of inspiration for my MK1 1.8T

Can't drive mine yet tho :-( bought it as a non runner about 5 month back so far I've replaced the head gasket, lapped all the valves whilst the head was off had the head skimmed, new turbo and it's now running lovely, currently have a ZR and insurance is up at the end of this month !!!

Zt time draws ever closer ..

[danbmx_69]

Originally Posted by Jakey010

10/10 on this thread I've spent the last few hours reading through it, you've done a beautiful job on the whole car!

Plenty of inspiration for my MK1 1.8T

Can't drive mine yet tho :-( bought it as a non runner about 5 month back so far I've replaced the head gasket, lapped all the valves whilst the head was off had the head skimmed, new turbo and it's now running lovely, currently have a ZR and insurance is up at the end of this month !!!

Zt time draws ever closer ..

Thanks for reply sounds like you have done alot of work allready, I hope it all goes well and you enjoy the car

[Skilrove]

Ooh soapland slip and slide... Like it!

[Dragrad]

Hi Daniel,

Taken some time to enlarge the thumbnails (where I could) to allow Registered Users the ability to see this "blog" at its best

[danbmx_69]

Originally Posted by Dragrad

Hi Daniel,

Taken some time to enlarge the thumbnails (where I could) to allow Registered Users the ability to see this "blog" at its best

Cheers Thanks

[Jakey010]

Originally Posted by danbmx_69

Thanks for reply sounds like you have done alot of work allready, I hope it all goes well and you enjoy the car

Yeah I've done quite a bit, mostly mechanical at the min, to get her back in a working state. Absolutely in love with it and I've not driven her yet lol !

[danbmx_69]

so here's the next job on the list, something this car has needed for a long time, going to be intresting to see how it works with the BCU active but with the key removed from the ignition, I Will hopefully be doing a instalation guide

uploadfromtaptalk1409585120467.jpg

[Jakey010]

Originally Posted by danbmx_69

so here's the next job on the list, something this car has needed for a long time, going to be intresting to see how it works with the BCU active but with the key removed from the ignition, I Will hopefully be doing a instalation guide

Attachment 39244

What does that do? Forgive me if that's a dumb question lol