Wiring Loom diagramme required

Yorkshire GOC · 17th August 2018, 08:21

Hi -anybody out there can share a wiring loom diagramme for an 04 MG ZT T - showing the set up from the front of the car (IPK?) to the parking aid ECU in the rear ?

Cheers

Jamiewelch · 17th August 2018, 15:59

Quote:

Originally Posted by Yorkshire GOC

Hi -anybody out there can share a wiring loom diagramme for an 04 MG ZT T - showing the set up from the front of the car (IPK?) to the parking aid ECU in the rear ?

Cheers

The parking aid ECU communicated through the K-Bus (Pin 4 on the Ecu). Off the top of my head I believe it is a white wire with a red stripe, and yellow dots every so often. But I'm sure someone can confirm the colour

. There is a cable which is in pin 8 of the parking ecu which goes to pin 13 of the IPK which is red with a green stripe.

Have you checked the sounder works in your IPK?

Yorkshire GOC · 17th August 2018, 16:06

Quote:

Originally Posted by Jamiewelch

The parking aid ECU communicated through the K-Bus (Pin 4 on the Ecu). Off the top of my head I believe it is a white wire with a red stripe, and yellow dots every so often. But I'm sure someone can confirm the colour

. There is a cable which is in pin 8 of the parking ecu which goes to pin 13 of the IPK which is red with a green stripe.

Have you checked the sounder works in your IPK?

Yes the sounder is working - both the door open lights on chime and the Hans Gauge beep are working - the sensors are clicking and i have swopped out the parking ECU, the reversing lights are working so the reverse switch is fine. It did work on first fitting of a new Parking ECU but ceased working soon after.

So am stumped as no sound at all ( not even the annoying long bleep) when engaging reverse gear - so am thinking is it something at the front of the car -faulty connection from Fuse 2 ?

marinabrian · 17th August 2018, 18:51

The PDC wiring diagram is attached for you

Brian

17th August 2018, 08:21	#1
Yorkshire GOC I really should get out more....... Rover 75 connoisseur se v6 auto Join Date: May 2014 Location: Hull Posts: 2,095 Thanks: 1,842 Thanked 623 Times in 469 Posts	Wiring Loom diagramme required Hi -anybody out there can share a wiring loom diagramme for an 04 MG ZT T - showing the set up from the front of the car (IPK?) to the parking aid ECU in the rear ? Cheers __________________ She came off the Longbridge Line on 20-05-2003 The Silver Machine was the 13th of 160 Rover 75's to come off the production line that day and is the 100th of 527 Starlight Silver Rover 75 2.5 V6 Connoisseur SE Auto saloons listed in the build records produced world wide.