|
||
|
27th March 2022, 14:18 | #1 |
Posted a thing or two
MG ZT-T 190+,Rover 800 vitesse coupe Join Date: Aug 2014
Location: Hamilton
Posts: 1,977
Thanks: 616
Thanked 228 Times in 210 Posts
|
How does front top suspension go back together
Hi nephew stripped this out and now I https://imgur.com/gallery/RRumJKwhave to refit, any info ?
Thanks
__________________
Robert |
27th March 2022, 15:11 | #2 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,718
Thanks: 358
Thanked 419 Times in 310 Posts
|
there are posts on here if you search in the google at the top of the page.if not then go onto rimmer bros website and look at the front suspension struts assembly drawings. all will be obvious .
|
27th March 2022, 16:08 | #3 |
Posted a thing or two
MG ZT-T 190+,Rover 800 vitesse coupe Join Date: Aug 2014
Location: Hamilton
Posts: 1,977
Thanks: 616
Thanked 228 Times in 210 Posts
|
Thanks had a look at rimmers and couldn’t work it out till I found a part that we had misplaced
__________________
Robert |
27th March 2022, 21:52 | #4 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,718
Thanks: 358
Thanked 419 Times in 310 Posts
|
top mount and bearing plus coil spring. grease up the bearing if poss and be careful when reassembling as the bearing must go in flush up against the rubber mount holder whilst releasing the spring. if not it will need to come off again. or separate as one of mine did ,after fitting, that was the type with the plastic bearing race that i fitted new ... good luck.
|
27th March 2022, 21:57 | #5 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,718
Thanks: 358
Thanked 419 Times in 310 Posts
|
just add as well that make sure the coil end is located in its correct end stop position,otherwise you will have issues with droplink threads and the coil may spin or break eventually....
|
|
|