|
||
|
6th April 2020, 12:31 | #11 |
This is my second home
MG ZT 2.0 CDTI+ in Typhoon, MG TF 135 in Typhoon & Rover 75 Connoisseur CDTI SE in Pearl Black Join Date: Oct 2012
Location: Norfolk
Posts: 7,523
Thanks: 2,718
Thanked 2,827 Times in 1,462 Posts
|
YAC112372 won't support rear parking sensors. You will need the separate sounder or change the cluster for one with part number beginning with YAC003xxx, YAC004xxx or YAC005xxx.
marinabrian may be able to help if you get in touch with him, as I think I've seen a post before where he was able to get a earlier part number cluster to support rear parking sensors.
__________________
How to retrofit Cruise Control on a diesel with no OEM wiring in place: Link How to retrofit heated electric memory seats with no OEM wiring in place: Link How to operate FBH and ATC via text Link How to restore cloudy projector headlights Link
Last edited by Rick-sta; 6th April 2020 at 14:15.. |
6th April 2020, 13:24 | #12 | |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Quote:
The one on my car is YAC112352, built April 2001 - it's got a message centre, amber lighting, MPH dial. Mine uses the parking sensor sounder under the LH side of the rear parcel shelf. Connector is black with 2 wires - Green/Brown and Green/(what looks like)Red. Your YAC number is so close to mine that (knowing MGR's system) there must be a link. |
|
6th April 2020, 14:20 | #13 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
And the PDC error is due to the absence of the speaker, I'm assuming you are using the retrofit black ECU? Brian |
|
6th April 2020, 14:44 | #14 |
Regular poster
Rover 75 Saloon Join Date: Nov 2006
Location: South Croydon
Posts: 71
Thanks: 25
Thanked 2 Times in 2 Posts
|
Thanks, Its good to know that my IPK doesn't support PDC.
I did buy the a parcel shelf speaker but I can't find the connector under the parcel shelf. Is it usually well hidden? Its also strange that when I connect the ecu and sensors I get beeps from the IPK. I haven't replaced the shelf or seats yet so I'll go and have another look. Thanks for everyone's help. MikeH. Yes. I'm using the black ecu. Last edited by mikeh; 6th April 2020 at 14:48.. Reason: missed question |
6th April 2020, 15:12 | #15 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
If you are using the black ECU with the correct loom, then the speaker outputs are pin 2 red with a light green tracer and pin 8 light green with a red tracer.
Pin 2 is connected to the speaker +VE and pin 8 to speaker -VE So you can test the speaker first to make sure all is well with your setup, and then mount it wherever you find it easiest.........if you wanted there is a mounting position near to the diagnostic socket in the drivers footwell where the speaker for smartnav would be normally mounted. Brian |
6th April 2020, 15:16 | #16 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Open the boot and take the carpet & board out. Also take the LH side trim off. There'll be a bunch of wires running back from the rear seat area on the left (nearside) - two of them are the sounder wires I mentioned earlier (at least that's what it's like on my car). If you don't have a sounder, the black connector could be doubled back and taped to the rest of the wires.
|
6th April 2020, 15:21 | #17 | |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Quote:
|
|
6th April 2020, 15:33 | #18 |
Regular poster
Rover 75 Saloon Join Date: Nov 2006
Location: South Croydon
Posts: 71
Thanks: 25
Thanked 2 Times in 2 Posts
|
Ok, removed all sound insulation from rear shelf and deffo no sounder connector. There is only a 3 pin one which reads amps/bmw.
I'll go back and have a look in nearside boot as per Blink. |
6th April 2020, 16:21 | #19 |
Regular poster
Rover 75 Saloon Join Date: Nov 2006
Location: South Croydon
Posts: 71
Thanks: 25
Thanked 2 Times in 2 Posts
|
Not in the LH boot area either. Where can the beeping noise from the front of the car be coming from when I put in it reverse?
|
6th April 2020, 20:55 | #20 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,890
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
try this web site
https://allbrit.de/UNI.cfm?PAGE=742634&SPRACHE=EN you may need to click top right to translate into English macafee2 |
Thread Tools | |
Display Modes | |
|
|