|
||
|
14th February 2013, 23:23 | #1 |
This is my second home
None at present Join Date: Sep 2010
Location: Portishead
Posts: 5,337
Thanks: 203
Thanked 246 Times in 194 Posts
|
Headlight Washer Holes In Bumper
Hi All...
I have sourced myself a new bumper... Now this bumper did not have headlight washers... Am I right in thinking that the holes that would need to be cut are already marked up As per the parking sensors on the rear bumpers
__________________
My First Ever Rover!! A 2002 75 2.0 V6 Club SE Tourer Then a 2002 MG ZT-T CDTI + in Starlight Silver Then a 2003 ZT-T 2.5 V6 180 + in Royal Blue Then a 2002 Rover 75 2.0 CDTi Connie SE Then a 2003 ZT-T 2.0 CDTi + In Le Mans Green 2004 1.8T ZT-T + In Goodwood Green [SIGPIC][/SIGPIC]
|
14th February 2013, 23:57 | #2 |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
Should be marked underneath....similar to parking sensors, you may need to clean the plastic as the marks feint
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
15th February 2013, 09:46 | #3 | |
This is my second home
None at present Join Date: Sep 2010
Location: Portishead
Posts: 5,337
Thanks: 203
Thanked 246 Times in 194 Posts
|
Quote:
Thanks for that mate...
__________________
My First Ever Rover!! A 2002 75 2.0 V6 Club SE Tourer Then a 2002 MG ZT-T CDTI + in Starlight Silver Then a 2003 ZT-T 2.5 V6 180 + in Royal Blue Then a 2002 Rover 75 2.0 CDTi Connie SE Then a 2003 ZT-T 2.0 CDTi + In Le Mans Green 2004 1.8T ZT-T + In Goodwood Green [SIGPIC][/SIGPIC]
|
|
15th February 2013, 18:59 | #4 |
Posted a thing or two
rover 75 Saloon, Rover 75 Tourer Join Date: Aug 2010
Location: Hornchurch
Posts: 1,180
Thanks: 361
Thanked 79 Times in 60 Posts
|
I cut them out
Hello,
They are very faint but they are there. I cut them out at a Nano meet with a dremmel. Paul |
15th February 2013, 22:07 | #5 |
Ex Owner
MX-5 ND2 RF Join Date: Sep 2010
Location: Leigh
Posts: 6,574
Thanks: 462
Thanked 799 Times in 524 Posts
|
Bit of an awkward shape, but a dremmel should manage it.
|
15th February 2013, 22:16 | #6 |
This is my second home
None at present Join Date: Sep 2010
Location: Portishead
Posts: 5,337
Thanks: 203
Thanked 246 Times in 194 Posts
|
Thanks for the replies guys....
I have such a tool for the job, so I better go and collect the bumper now then!!
__________________
My First Ever Rover!! A 2002 75 2.0 V6 Club SE Tourer Then a 2002 MG ZT-T CDTI + in Starlight Silver Then a 2003 ZT-T 2.5 V6 180 + in Royal Blue Then a 2002 Rover 75 2.0 CDTi Connie SE Then a 2003 ZT-T 2.0 CDTi + In Le Mans Green 2004 1.8T ZT-T + In Goodwood Green [SIGPIC][/SIGPIC]
|
15th February 2013, 22:20 | #7 |
Posted a thing or two
120d M Sport Join Date: Feb 2012
Location: Sunny Weymouth
Posts: 1,815
Thanks: 153
Thanked 142 Times in 121 Posts
|
I used 2 drills & cut the bits in between with a Stanley knife.
|
15th February 2013, 22:24 | #8 |
I really should get out more.......
ZT CDTi 135, ZT260SE Join Date: Feb 2011
Location: Dundee
Posts: 2,877
Thanks: 10
Thanked 331 Times in 213 Posts
|
I understood that the mk2 bumpers did not have these markings?
|
16th February 2013, 07:54 | #9 |
Ex Owner
MX-5 ND2 RF Join Date: Sep 2010
Location: Leigh
Posts: 6,574
Thanks: 462
Thanked 799 Times in 524 Posts
|
The OP has a MK1 so no problem
|
16th February 2013, 18:47 | #10 |
Gets stuck in
Rover 75 Tourer Join Date: Aug 2011
Location: Lancaster
Posts: 988
Thanks: 112
Thanked 51 Times in 36 Posts
|
I didn't think that you were right about this. But you are . There are no such marks on my facelift bumper that is gathering dust awaiting fitting.
Anyone have any location measurements for drilling? I 'd be gutted if I got this wrong Cheers, Dave |
|
|