|
||
|
29th August 2013, 18:28 | #1 |
Newbie
ROVER 75 TOURER Join Date: Jul 2013
Location: CLEVELAND
Posts: 13
Thanks: 1
Thanked 0 Times in 0 Posts
|
transmission fluid
Hi , i just changed my transmission fluid as the gear change was very slow and seemed to be slipping i used the method of removing bottom oil cooler pipe and flushing out old brown smelly fluid ,, it seemes much better since change so thanks to all the posts here that helped soo much .
Only thing im not sure about is the fluid i used that i got from my local motor factor !!! it is called silver hook autmatic transmission fluid it says it exceeds specifications (Ford M2C 33G) Dextron IID & R SHT5 . its lookes the right colour a nice reddy pink . Has any one heard of this make and will it be ok for prolonged use ??? many thanks Mike . |
29th August 2013, 20:08 | #2 | |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,380
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Quote:
If you have any continued problems with your automatic transmission you might consider changing to the recommended spec. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
|
30th August 2013, 08:21 | #3 |
Newbie
ROVER 75 TOURER Join Date: Jul 2013
Location: CLEVELAND
Posts: 13
Thanks: 1
Thanked 0 Times in 0 Posts
|
fluid
ok thank you
|
30th August 2013, 09:06 | #4 |
Gets stuck in
N/A Join Date: Oct 2012
Location: N/A
Posts: 658
Thanks: 50
Thanked 133 Times in 103 Posts
|
A reasonably priced fully synthetic ATF from CARLUBE (ATFU) meets the the Texaco N402 specification and is probably more available. It does actually mention the N402 on its packaging too.
|
30th August 2013, 09:12 | #5 | |
This is my second home
75 Tourer CDT Join Date: Dec 2011
Location: Enfield
Posts: 3,925
Thanks: 63
Thanked 431 Times in 237 Posts
|
Quote:
|
|
31st August 2013, 09:12 | #6 |
Newbie
ROVER 75 TOURER Join Date: Jul 2013
Location: CLEVELAND
Posts: 13
Thanks: 1
Thanked 0 Times in 0 Posts
|
fluid
Thanks again for all the helpfull advice ,,, i will run the car for now till i have the spare cash for better fluid , as long as its not going to damage the transmission and i guess it will give it a good flush out .
|
31st August 2013, 10:13 | #7 |
This is my second home
MG ZTT 180 Sports Auto. Join Date: Dec 2006
Location: London
Posts: 3,930
Thanks: 18
Thanked 180 Times in 143 Posts
|
The correct fluid is available from Xpart / Rimmers. I see no reason to use a compatible product if the original correct stuff is still available
VYK000040 is the part number. http://www.rimmerbros.co.uk/Item--i-VYK000040 Ed |
31st August 2013, 13:13 | #8 |
This is my second home
75 Tourer CDT Join Date: Dec 2011
Location: Enfield
Posts: 3,925
Thanks: 63
Thanked 431 Times in 237 Posts
|
I did, on a very tight budget I saw good reason to use the compatible! By the time you add vat and extortionate delivery charge from Rimmers, your looking at over £50. For less than that I got twice the fluid, delivered to the door, and was able to to a complete flush.
However I do take your point, if money was not so tight I would have used the original fluid myself. |
31st August 2013, 13:49 | #9 |
This is my second home
MG ZTT 180 Sports Auto. Join Date: Dec 2006
Location: London
Posts: 3,930
Thanks: 18
Thanked 180 Times in 143 Posts
|
I looked at using Carlube but it only saved £20 over the MGR fluid. imho £48 every 60k is not a huge ammount so worth it.
The MGR fluid can be collected from Xpart outlets Rimmers are just one of many. http://mgroverpartfinder.com/Distrib...JF403E%29.aspx Last edited by capese21; 31st August 2013 at 13:56.. |
31st August 2013, 15:11 | #10 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,380
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Correct? Compatible?
Ed & David,
In RAVE Rover states: "Use Texaco N402 or equivalent". I understand that to mean a container branded with the Texaco logo and the ATF type N402. A club member wrote to Chevron (the OEM company) who said that they no longer manufacture Texaco N402. They offered a current product, Texaco Havoline Multi-Vehicle ATF, which is suitable. We cannot argue with the OEM about that! We don't know who manufactures MGR/X-Part VYK 000040 but if my memory serves me correctly Chevron said it wasn't them. So, strictly speaking, VYK 000040 isn't any more 'correct' than Carlube ATF-U or Havoline Multi-Vehicle ATF. Since the original Texaco fluid is no longer available, they are all 'compatible' products because they all meet the required specification: Texaco N402. This is all that matters. ATF-U might meet other standards as well but that doesn't make it any less suitable or inferior to VYK 000040. When it comes to lubricants people seem to be very passionate about brand loyalty, and that's entirely their choice. I guess that the marketing people have done a good job. But as far as engineering considerations are concerned, if it meets N402 spec. it's fine! Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
|
|