|
||
|
22nd January 2011, 14:25 | #1 |
Posted a thing or two
MG ZT 190 SE Dark Fantasy Join Date: Apr 2010
Location: Warwick
Posts: 1,227
Thanks: 11
Thanked 19 Times in 7 Posts
|
Camshaft Sensor
To solve my intermittent starting issues (will start from cold, but if started then turned off for 20 minutes will not start) i have narrowed down to camshaft sensor (engine turns over regardless)
Now the part from rimmers is NSC000310 - £68.60 But i have been told that the Landrover part with KV6 engine will also fit; NSC000310L - £37.22 is that true? If so can i use with MG Rover Link Lead? YSB002450 - £7.01 Car is Mg ZT 190 2001 thanks all!
__________________
all working like a dream |
22nd January 2011, 14:28 | #2 |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,591
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
L on the end of a part number is indeed the same part.
Just look at the power VIS MKE100102, stick an L on the end and see the difference in price for the same part. I would assume the link lead is the same also
__________________
Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident Last edited by stocktake; 25th January 2011 at 12:08.. |
22nd January 2011, 19:40 | #3 |
Newbie
75 Saloon Join Date: Mar 2008
Location: Milton Keynes
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
|
I just fixed this problem today on my 75.
See my thread and solution etc. at http://www.the75andztclub.co.uk/foru...462#post657462 Cheers, Paul |
23rd January 2011, 11:08 | #4 |
Posted a thing or two
MG ZT 190 SE Dark Fantasy Join Date: Apr 2010
Location: Warwick
Posts: 1,227
Thanks: 11
Thanked 19 Times in 7 Posts
|
thanks Paul, interesting reading
parts order, lets see how it goes!
__________________
all working like a dream Last edited by rizel23; 23rd January 2011 at 11:50.. |
25th January 2011, 11:06 | #5 |
Posted a thing or two
MG ZT 190 SE Dark Fantasy Join Date: Apr 2010
Location: Warwick
Posts: 1,227
Thanks: 11
Thanked 19 Times in 7 Posts
|
just for anyone reading, for future reference, the parts i bought in post 1 all fitted fine with no modification needed. dont forget to remove the old o ring seal before fitting new camshaft sensor. From testing this morning car has started every time now from warm.
__________________
all working like a dream |
|
|