Engine disabled warning light URGENT - Page 2

Raven Black · 3rd February 2020, 14:38

Thanks to the prompt response of our members, thanks a lot, I would have been in dire straits otherwise as the rover was parked behind the MG so without sorting it I would have been car less!!

Thanks everyone.

stocktake · 3rd February 2020, 14:58

Quote:

Originally Posted by Jnorris

Thanks so much to you all for your quick responses.
I have opened the old case and luckily the transponder is still in it. I think I will wait until next week for breakfast meet and take it over and see if Teflon or Peter can help me change it over properly.

Your not the first to do this and you certainly won't be the last

Glad you're sorted

marinabrian · 3rd February 2020, 20:47

Well Jennie, I've just received my stock of Valeo cases, so if you want the key refurbishing properly, or indeed the other key done so you can see the difference between the £2 rubbish from eBay and a real one just let me know

It will also save you from breaking your finger tips off, when you are trying to press the rock hard buttons, because these are just like the originals, only brand new

Brian

bl52krz · 7th February 2020, 23:00

Just a bit of advice. Don’t try to lever the transponder out of the casing. Just cut each end of the casing round the transponder and bend the casing away from the transponder and out it pops easily. Done this on the Four I have replaced.

3rd February 2020, 14:38	#11
Raven Black Gets stuck in Rover 75 saloon Join Date: Jan 2019 Location: Horley Posts: 877 Thanks: 703 Thanked 267 Times in 198 Posts	key Thanks to the prompt response of our members, thanks a lot, I would have been in dire straits otherwise as the rover was parked behind the MG so without sorting it I would have been car less!! Thanks everyone. __________________ 2002 Connie SE CDTi Raven Black saloon 1978 MGBGT Brooklands Green

7th February 2020, 23:00	#14
bl52krz This is my second home Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008 Location: Birmingham Posts: 11,387 Thanks: 6,587 Thanked 2,262 Times in 1,729 Posts	Just a bit of advice. Don’t try to lever the transponder out of the casing. Just cut each end of the casing round the transponder and bend the casing away from the transponder and out it pops easily. Done this on the Four I have replaced. __________________ Great Barr, Birmingham.

3rd February 2020, 20:47	#13
marinabrian MG ZT Join Date: Jan 2011 Location: Newcastle Upon Tyne Posts: 20,151 Thanks: 3,565 Thanked 10,837 Times in 5,718 Posts	Well Jennie, I've just received my stock of Valeo cases, so if you want the key refurbishing properly, or indeed the other key done so you can see the difference between the £2 rubbish from eBay and a real one just let me know It will also save you from breaking your finger tips off, when you are trying to press the rock hard buttons, because these are just like the originals, only brand new Brian