TSD000020 "selector bush"

pondweed · 17th October 2008, 15:30

been sent these as clutch pedal top hat bushes - but they are metal! Are they uprated/later spec ones of SKW100040?? (number 28 on link below) or sommat else??!

http://66.163.168.225/babelfish/tran...c%2fr%2f123553

T-Cut · 17th October 2008, 15:41

The description 'selector bush' doesn't seem to tally with the required part i.e. The clutch pedal pivot bush.

To me, it sounds like something from the transmission.

EDIT: Here it is: Part 17 in this diagram. Clearly not what you need.

http://66.163.168.225/babelfish/tran...c%2fr%2f134422

TC

Greeners · 17th October 2008, 15:45

TSD000020 is the bush that goes on the selector shaft that comes out of the gear box

SKW100040 is listed as a bush-pedal pivot-brake not clutch...although I suspect they are similar as both pedals sit on the same pivot

Greeners · 17th October 2008, 15:51

you might want to look at

SUN100110 - Bush clutch, which is listed, but only a single one is used........

pondweed · 17th October 2008, 16:42

yup - that one is on the top of the actuator, attaching to the spring. the other two are on the central rod so it must be them

thanks for ID on the others!

17th October 2008, 15:30	#1
pondweed This is my second home Waiter, Waiter! I seem to have a Roomster in my drive... Join Date: Nov 2006 Location: Sussex Posts: 3,268 Thanks: 0 Thanked 1 Time in 1 Post	TSD000020 "selector bush" been sent these as clutch pedal top hat bushes - but they are metal! Are they uprated/later spec ones of SKW100040?? (number 28 on link below) or sommat else??! http://66.163.168.225/babelfish/tran...c%2fr%2f123553

17th October 2008, 15:41	#2
T-Cut This is my second home Rover75 and Mreg Corsa. Join Date: Nov 2006 Location: Sumweer onat mote o'dust (Sagin) Posts: 21,753 Thanks: 341 Thanked 3,660 Times in 2,924 Posts	The description 'selector bush' doesn't seem to tally with the required part i.e. The clutch pedal pivot bush. To me, it sounds like something from the transmission. EDIT: Here it is: Part 17 in this diagram. Clearly not what you need. http://66.163.168.225/babelfish/tran...c%2fr%2f134422 TC Last edited by T-Cut; 17th October 2008 at 15:46..

17th October 2008, 15:45	#3
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	TSD000020 is the bush that goes on the selector shaft that comes out of the gear box SKW100040 is listed as a bush-pedal pivot-brake not clutch...although I suspect they are similar as both pedals sit on the same pivot __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

17th October 2008, 15:51	#4
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	you might want to look at SUN100110 - Bush clutch, which is listed, but only a single one is used........ __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

17th October 2008, 16:42	#5
pondweed This is my second home Waiter, Waiter! I seem to have a Roomster in my drive... Join Date: Nov 2006 Location: Sussex Posts: 3,268 Thanks: 0 Thanked 1 Time in 1 Post	yup - that one is on the top of the actuator, attaching to the spring. the other two are on the central rod so it must be them thanks for ID on the others!