|
|
|
|
|
|
||
|
|
||
16th October 2008, 14:18
|
#1 |
|
Gets stuck in
rover75 conny 1.8 white gold Join Date: May 2007
Location: liverpool
Posts: 509
Thanks: 0
Thanked 0 Times in 0 Posts
|
fuse
my reversing lights are not working i would think if the bulbs are blown that would show on the buld failure system
I have checked the fuse diagram in the owners handbook but its a diffrent fuse box haynes manual has the correct fuse box but i cannot see reversing light fuse in diagram car is 1.8 petrol steve.. |
|
|
|
16th October 2008, 14:46
|
#2 |
|
Avid contributor
Rover 75 2.0 cdt connoisseur SE tourer Automatic Join Date: Jan 2008
Location: Retford
Posts: 106
Thanks: 0
Thanked 0 Times in 0 Posts
|
10 amp fuse 41 is reversing lights and cruise control according to the handbook.When my reversing lights stopped working this is the fuse I replaced to get them working again.
Hope this helps Barry |
|
|
|
|
16th October 2008, 14:47
|
#3 |
|
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
Reversing lights are covered by the warning system, if you've checked the fuse, it's almost certainly the switch on the side of the craer box About £10 from Xpart.
__________________
David  Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
|
|
|
|
16th October 2008, 16:00
|
#4 | |
|
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,591
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
Quote:
craer = gear  Seriously, this is almost certainly the problem 
__________________
Dave...  Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident
|
|
|
|
|
|
16th October 2008, 16:25
|
#5 |
|
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
Thank you to the Dave Translation service.
Would you like it in Welsh? |
|
|
|
|
16th October 2008, 16:32
|
#6 | |
|
This is my second home
Rover 75 V8 Join Date: Oct 2006
Posts: 3,448
Thanks: 0
Thanked 206 Times in 32 Posts
|
Quote:
 ....................
__________________
Mike [SIGPIC][/SIGPIC] |
|
|
|
|
|
16th October 2008, 16:34
|
#7 | |
|
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
Quote:
Mike sorry for delay your Package is going out tomorrow. Been working away Again. |
|
|
|
|
|
16th October 2008, 18:48
|
#8 |
|
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
that's what 2 days without sleep does........
 .
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
|
|
|
|
16th October 2008, 20:04
|
#9 |
|
Gets stuck in
rover75 conny 1.8 white gold Join Date: May 2007
Location: liverpool
Posts: 509
Thanks: 0
Thanked 0 Times in 0 Posts
|
just looking at number 41 fuse can somebody tell me what the interlock control unit is used for
steve.. |
|
|
|
|
17th October 2008, 10:19
|
#10 |
|
Gets stuck in
rover75 conny 1.8 white gold Join Date: May 2007
Location: liverpool
Posts: 509
Thanks: 0
Thanked 0 Times in 0 Posts
|
Just checked fuse its ok so it must be the switch itself
steve.. |
|
|
|
 |
|
|
Linear Mode
