|
||
|
24th May 2007, 21:10 | #1 |
Newbie
Join Date: Mar 2007
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Retro Fit Message Centre Button
Hi
After shopping around I have a brand new IPK for my face lift 75, thanks to SMC who are selling them at a really good price. I have a new traffic master ECU and associated cables got these from Rimmer's I have finally got a second hand indicator stalk with trip button got these from a scrappy. I know what’s involved in fitting the IPK and traffic master. My question is how do I change my indicator arm? Could some one tell me how I go about taking the old out and putting the new one in. Many Thanks Andy |
25th May 2007, 08:23 | #2 |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
Indicator arm is easy.
Remove lower dash panel (2 screws and 3 clips from memory) Undo 2 screws in lower steering column shroud. Drop column as low as it will go. Lift off top shroud Undo 2 screws hold stalk on Unplug connector. Then insert new stalk and repeat above in reverse. HTH
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
25th May 2007, 11:49 | #3 |
Newbie
Join Date: Mar 2007
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks for this
Hi
Thanks for this bud, i will be doing it on Sunday so thanks for your help Andy |
Thread Tools | |
Display Modes | |
|
|