HELP !!! IPK Not Working

DaveyC · 10th July 2014, 12:09

Just swapped my dials over (Thanks to Kalrzy).

All went well, until I plugged them back in and nothing!!! Not even a flicker out of the ignition light, or anything. Tried unplugging and plugging back in again....

Out of ideas. Some helpful advice would be greatly appreciated chaps......

Edit: Indicators & Hazard's not working either :-(

Thanks,

Dave

suffolk boy · 10th July 2014, 12:25

i did the same the plugs are not it fully. the horseshoe clip must be flat b4 inserting they go home with a clunk when in correctly

petespieces · 10th July 2014, 12:33

Quote:

Originally Posted by suffolk boy

i did the same the plugs are not it fully. the horseshoe clip must be flat b4 inserting they go home with a clunk when in correctly

Ditto, been there done that

suffolk boy · 10th July 2014, 12:38

Quote:

Originally Posted by petespieces

Ditto, been there done that

had that happen when i put trafficmaster.no indicators no warning lights etc.they are bit tricky due to the limited access.in think i put them in the sockets reached over the top and gave them a good push.

DaveyC · 10th July 2014, 13:05

Thanks chaps!!! It worked.

I now have all systems working

For a minute I was $@***ng myself there. Those plugs are a nightmare to to reach round and get in fully.

I'll start a thread on my new dials when i have stopped sweating

suffolk boy · 10th July 2014, 13:12

i remember mine well.had to get a lift into work.when i finished in the middle of the night went out to the car tried again.hey presto it worked!i then hit the beer big time

DaveyC · 10th July 2014, 13:14

Foolishly expected it to be a 30 min job.

At least it fixed.

10th July 2014, 12:09	#1
DaveyC I really should get out more....... MG ZT-T Diesel Join Date: Jun 2012 Location: Costa-Del-Dudley Posts: 2,432 Thanks: 213 Thanked 259 Times in 204 Posts	HELP !!! IPK Not Working Just swapped my dials over (Thanks to Kalrzy). All went well, until I plugged them back in and nothing!!! Not even a flicker out of the ignition light, or anything. Tried unplugging and plugging back in again.... Out of ideas. Some helpful advice would be greatly appreciated chaps...... Edit: Indicators & Hazard's not working either :-( Thanks, Dave __________________ [SIGPIC][/SIGPIC] Last edited by DaveyC; 10th July 2014 at 12:15..

10th July 2014, 12:25	#2
suffolk boy This is my second home fiat panda Join Date: Sep 2009 Location: haverhill Posts: 6,720 Thanks: 96 Thanked 586 Times in 526 Posts	i did the same the plugs are not it fully. the horseshoe clip must be flat b4 inserting they go home with a clunk when in correctly __________________ fiat panda 1.2 eco

10th July 2014, 13:05	#5
DaveyC I really should get out more....... MG ZT-T Diesel Join Date: Jun 2012 Location: Costa-Del-Dudley Posts: 2,432 Thanks: 213 Thanked 259 Times in 204 Posts	Thanks chaps!!! It worked. I now have all systems working For a minute I was $@***ng myself there. Those plugs are a nightmare to to reach round and get in fully. I'll start a thread on my new dials when i have stopped sweating __________________ [SIGPIC][/SIGPIC]

10th July 2014, 13:12	#6
suffolk boy This is my second home fiat panda Join Date: Sep 2009 Location: haverhill Posts: 6,720 Thanks: 96 Thanked 586 Times in 526 Posts	i remember mine well.had to get a lift into work.when i finished in the middle of the night went out to the car tried again.hey presto it worked!i then hit the beer big time __________________ fiat panda 1.2 eco

10th July 2014, 13:14	#7
DaveyC I really should get out more....... MG ZT-T Diesel Join Date: Jun 2012 Location: Costa-Del-Dudley Posts: 2,432 Thanks: 213 Thanked 259 Times in 204 Posts	Foolishly expected it to be a 30 min job. At least it fixed. __________________ [SIGPIC][/SIGPIC]