|
||
|
|
2nd March 2007, 13:18 | #1 |
Banned
ROVER 75 2.5 V6 Connoisseur SE Limousine 2004 Join Date: Oct 2006
Location: Welling
Posts: 10,995
Thanks: 0
Thanked 2 Times in 2 Posts
|
FaceLift bonnet catch
Hi All,
I am after a part number for a FaceLift bonnet catch as i will have to change mine over at some stage from a pre facelift, also any ideas how to change it over ? Utill i see the part i'm a bit as to how it fits. Cheers |
2nd March 2007, 13:41 | #2 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
These are all the Part Numbers and descriptions for all the Bonnet release parts that make up the Facelift Model.
FSE000130 Cable assembly-bonnet release assembly FSE000140 Cable-bonnet release assembly FSE000150 Cable-bonnet release assembly FTI100000 Coupler-bonnet release cable FPC100190 Catch assembly-bonnet safety FPC000010 Catch assembly-bonnet safety FPC000050 Catch assembly-bonnet FS106127 Screw-flanged head - M6 x 12 - bonnet catch FPS100441 Latch assembly-bonnet - burglar alarm. FS106307 Screw-flanged head - M6 x 30 - bonnet latch FPJ100170 Striker-bonnet FYG10007 Bolt-washer - M6 x 10 - bonnet striker FSC100340PMA Lever assembly-bonnet release assembly SYC101000 Clip-cable FTU000010 Housing - Bonnet Release Coupler FTX000010 Shuttle - Bonnet Release Coupler Some of the Repeated Parts are for if you have the MG Badge or Rover Badge & Grill etc let me Know what front you are putting on for the Correct Reference. Some are done by Serial Number also. Last edited by JohnDotCom; 2nd March 2007 at 13:53.. |
2nd March 2007, 13:48 | #3 |
Banned
ROVER 75 2.5 V6 Connoisseur SE Limousine 2004 Join Date: Oct 2006
Location: Welling
Posts: 10,995
Thanks: 0
Thanked 2 Times in 2 Posts
|
And in english ?
|
2nd March 2007, 14:01 | #4 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
Not my intention to confuse Kandyman sorry,
You would need Part Number: FPC000050 Catch assembly-bonnet. Which is the Facelift MG release Lever/Button under Bonnet. The reason for the Complete List as shown in Post 2 is that some parts have different Part Numbers to those on MK1 so not sure if they fit directly or need to be changed. Im sure Alex may Know if they switch direct or anybody else who has changed out there. |
2nd March 2007, 14:06 | #5 |
Banned
ROVER 75 2.5 V6 Connoisseur SE Limousine 2004 Join Date: Oct 2006
Location: Welling
Posts: 10,995
Thanks: 0
Thanked 2 Times in 2 Posts
|
Thanks for tidying up post 2 it makes a bit more sense now
I'm hoping it's just a swap over of the Catch assembly. Any one care to assist with a little How To |
2nd March 2007, 14:39 | #6 |
Posted a thing or two
http://Roadca.ms - Letting you see what they see! Join Date: Nov 2006
Location: Yup
Posts: 1,786
Thanks: 0
Thanked 7 Times in 1 Post
|
Hi.
Could you not fit a ZT one instead of a facelift one? I'm guessing this is for the meshing that's also holding up my plans too |
|
|