|
||
|
13th October 2013, 14:02 | #1 |
Newbie
ROVER75 CDT Join Date: Oct 2013
Location: Haddington
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
engine warning light on
Can anyone help. i own an 1.8i conn saloon. Came home from work. stopped car no warning lights on.
next morning went to start. engine turn over but didnt fire up, noticed the engine warning light on. checked timing belt, changed cam sensor, still turns over will not fire up. no engine faults recorded. yet engine warning light still on. |
13th October 2013, 15:17 | #2 |
This is my second home
Hyundai i10 998cc Join Date: Mar 2012
Location: Kilmarnock
Posts: 6,602
Thanks: 2,088
Thanked 2,298 Times in 1,349 Posts
|
Hi.
Does the MIL lamp not go out once the engine fires up? If so in your case it wont as you have a non running engine. You need to check the basics, do you have a spark at the plugs? do you have fuel. The in tank fuel filter can come apart which can lead to no fuel pressure. You will find many posts on the (FOC) Fabled "orange Clip", I'm sure that if either the cam or crank sensor is U/S it will throw up an error code.
__________________
Cheers from Trevor MM0KJJ |
13th October 2013, 15:54 | #3 |
Passed Away
MG ZT-T 160 Join Date: Feb 2009
Location: Chester
Posts: 1,307
Thanks: 64
Thanked 222 Times in 145 Posts
|
have you got access to an OBD2 reader ?
That would then give you error code and you'd know where to look. Doesn't need to be a T4 for this, but they aren't much use above just getting the codes and clearing the faults (which will of course return if fault hasn't been fixed). HTH |
13th October 2013, 18:10 | #4 |
This is my second home
Hyundai i10 998cc Join Date: Mar 2012
Location: Kilmarnock
Posts: 6,602
Thanks: 2,088
Thanked 2,298 Times in 1,349 Posts
|
Hi.
The OP explained in his post that there were no error codes, I would imagine he has access to a reader.
__________________
Cheers from Trevor MM0KJJ |
13th October 2013, 18:28 | #5 | |
Passed Away
MG ZT-T 160 Join Date: Feb 2009
Location: Chester
Posts: 1,307
Thanks: 64
Thanked 222 Times in 145 Posts
|
Quote:
OBD2 would enable clear of faults and see if the light goes off and comes back on. Could of course of meant error messages in IPK, got to cover all bases as not yet got my mind reading upgrade fitted |
|
13th October 2013, 18:42 | #6 |
This is my second home
Hyundai i10 998cc Join Date: Mar 2012
Location: Kilmarnock
Posts: 6,602
Thanks: 2,088
Thanked 2,298 Times in 1,349 Posts
|
Yes indeed you are quite right. Perhaps the OP could fill us in with some more info
__________________
Cheers from Trevor MM0KJJ |
14th October 2013, 12:39 | #7 |
Newbie
ROVER75 CDT Join Date: Oct 2013
Location: Haddington
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
engine warning light on
thanks guys, got spark at plugs but no fuel coming fro fuel tank to injectors.
check fuses all okay. with ingintion on pump not making a noise. could this be the problem. |
14th October 2013, 12:44 | #8 |
Passed Away
MG ZT-T 160 Join Date: Feb 2009
Location: Chester
Posts: 1,307
Thanks: 64
Thanked 222 Times in 145 Posts
|
sounds like it could be the FOC (Fabled Orange Clip).
Do a search as lots of how-to's etc and what to check. The clip holds the fuel filter together as they do tend to unscrew apart and then the car won't start. It's a pretty easy fix and clip is only around a fiver from rimmer brothers. HTH |
14th October 2013, 12:45 | #9 | |
Regional Secretary North Scotland
MG ZS Exclusive 1.0T Auto 2022 Join Date: Feb 2008
Location: Tayport
Posts: 5,754
Thanks: 1,676
Thanked 1,855 Times in 1,058 Posts
|
Orange clip?
Quote:
Can you hear the fuel pump whirr a bit when you turn on ignition ( before firing) You should. Try and see first. If not problem could be with in tank fuel pump. Just a couple of ideas. Chris |
|
14th October 2013, 12:47 | #10 |
Passed Away
MG ZT-T 160 Join Date: Feb 2009
Location: Chester
Posts: 1,307
Thanks: 64
Thanked 222 Times in 145 Posts
|
found the link for you
http://www.the75andztclub.co.uk/foru...ad.php?t=58868 |
|
|