|
||
|
|
27th January 2016, 04:03 | #1 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
Key coding & EWS
Just as a matter of interest Ive been playing around with my EWS Editor Lite program to see what it can and cant do while waiting for some new key chips to arrive and as I had a spare EWS module, thought id see if you can code existing old keys from other Rover 75 cars to the EWS.
Info says it can be done.. I had a coupple of old Rover 75 keys so tried it out and found a couple of interesting things,the program definately reads the old keys and it will code the old key to the EWS -EXCEPT it seems to always want to take key position 00 and will replace the key that is already listed on the EWS at 00. Unfortunately key 00 is usually the active one but this is fine if you have no key or your one key you have is listed at 01 or 02 but in my case,the one working key was listed at 00 so it would have been pointless to do it. Pain in the a...se as no matter what even if I tagged the key as 03 or whatever number,the key data would then change to the data that already existed for the key listed in the EWS at position 03. Suppose its fine for a car with no keys but seems you need blank chips to take up the spare key data (KEYS 3 TO 9 )from the EWS. At least you can use the circuit board in the old keys. additional info - seems the original transponder chips ,PCF7930 are not a re writeable chip ,once coded thats it. ,the current chip to use appears to be a PCF7935. Last edited by genpk; 27th January 2016 at 08:50.. |
27th January 2016, 09:56 | #2 |
Regular poster
Rover 75 Saloon Join Date: Jan 2016
Location: Sydney
Posts: 78
Thanks: 34
Thanked 5 Times in 5 Posts
|
Pity, would have been very helpful down under.
|
27th January 2016, 11:32 | #3 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
Sure would although it appears a couple of auto locksmiths around here now have similar software and claim they can code Rover 75 keys to the EWS.
As you still need to get the locksmiths to cut the blade for the key might be able to strike a deal to get the key cut and programed,especially if you know how easy it is to do it. My thought is the chips are about $8 a pop,bought the program for about $100, second hand keys were free. Only cost should be for the blades to be cut. Had one guy quote $50 just to cut one blade. |
1st February 2016, 10:36 | #4 | |
Regular poster
Rover 75 Saloon Join Date: Jan 2016
Location: Sydney
Posts: 78
Thanks: 34
Thanked 5 Times in 5 Posts
|
Quote:
|
|
1st February 2016, 11:29 | #5 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
Well, I can code you a key but it will only start your car,no remote key functions though and id need your EWS module anyway and im in Perth.
If you check ebay they sell the EWS Editor Lite pretty cheap. Between me and Brian (marinabrian) and PhilT4 you should be able to make your own keys. As Phil T4 says, we need a vurtual T4. I assume a VT4 codes the keys to work with the remote. What do these things cost ? At least as said I can code an extra key to run the car. |
1st February 2016, 12:44 | #6 | ||
This is my second home
1.8t Tourer Join Date: Oct 2011
Location: Tanelorn
Posts: 4,830
Thanks: 956
Thanked 1,148 Times in 916 Posts
|
off topic apologies...
Quote:
Quote:
What can I say swmbo likes it, I like it when it behaves. Not to mention that 1.8t 75 tourers are actually quite rare as well. Thing is we don't need to pull/carry heavy loads with it, or do lots of miles on a daily basis (so ruled out diesel). Just easier for going camping, especially with the muddy furry one (the dog) Fed up with my car getting messed up everytime we go away...
__________________
Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button |
||
29th January 2016, 06:54 | #7 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
If you attempt to copy a key transponder to the EWS, yes it can be done.......however the EWS will see this as a data mismatch as the VIN is locked in the transponder thus making the transponder useless.
The PCF7930AS has the security fuse blown after programming, meaning it cannot be overwritten with new data from another EWS, again meaning used transponders cannot be reused. Brian Quote:
|
|
29th January 2016, 07:21 | #8 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
brian, your a wealth of wisdon regarding this stuff.
I did wonder if the factory fitted PCF7930 chip could be re coded but obviously not. I bought some of those chips (PCF7935) you put me onto and just waiting for those to arrive. As you describe,I could get a used key to list in the EWS but as you say when you go to verify the EWS, kept coming up as a mismatch no matter what I did which explains exactly what you say. I notice on the EWS there are a number of keys( 2 or 3) listed as active and you can see those keys full details (variable and fixable ?) codes. All the other keys listed seem to only have the first part of the code and then a bunch of 'F"s in the coded area. If i code a new chip to one of those keys with only part of the code revealed will it work ? I think I read somewhere that when you use it the cars body control unit fills in the code for that key ? |
29th January 2016, 08:22 | #9 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
The first part is the fixed code of the key, the second variable part changes every time the key is turned
If you uncheck the box "used key" you will find the variable part of the code disappears and is replaced with FFF's Quote:
|
|
1st February 2016, 07:41 | #10 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
Ok , got the blank chips ,plugged in the EWS Editor Lite,read the EWS module out of the car, coded a blank transponder chip using one of the spare keys listed in the EWS and low and behold I now have a spare key that starts my car, only issue is the remote controls do not function with that key.
Still work fine with the original. From what I gather the EWS talks to the ECU and if all is correct it will allow the car to start BUT the body control unit is the thing that govern locking etc so if it doesnt recognize the new key it wont allow any remote locking to happen. Ive tried the press the fob lock button 4 times etc,stand on your head and scratch your ...... but nothing appears to want to synchronize the new fobs remote. Wonder if the transponder chip needed to be in the fob when coding it to the EWS,as in does the fob itself have some impact on the programing ? Need one of you gurus out there!!!!! Last edited by genpk; 1st February 2016 at 07:44.. |
|
|