Angel Eye's Fitted

[tony_fry]

Originally Posted by steve1

Try this item number on e-bay seems to be the item 320943871808

They look the same as the ones, I fitted, but I got two sets of 2 bulbs (so I now have a spare set of 2 bulbs).

[T-Cut]

Can anyone who's fitted CCFLs to the projector lens collar confirm the internal diameter?
I have them down as 90mm.

I know you can buy them somewhat cheaper in pairs from China.

How did you wire them up from a single inverter?
Is the high tension wiring safe?

TC

[suzublu]

They are supplied with an inverter for both rings T.C

[derekosb]

They look excellent. I remember AldoR doing that to his V8 about 3 years ago. He posted some detailed photos of how the lights looked when they were taken apart but didn't do it himself IIRC.

Found the thread and I see it had some updated traffic on it a few months ago. http://www.the75andztclub.co.uk/foru...ght=Angel+Eyes

Derek

[T-Cut]

Originally Posted by suzublu

They are supplied with an inverter for both rings T.C

I'm wondering about the extension wiring needed to connect one or both to the inverter, depending on where you locate it. The wiring to the rings operates at 200volts plus I believe, so needs more safety measures in place than your average lamp. The PVC encased silicone leads they come with aren't long enough (to fit both) and you're advised not to modify them (for safety reasons). The two rings/one inverter kit is for fitting as one double-ring lamp.

So, I bought an inverter for each ring to ensure safety.

TC

[MSS]

Originally Posted by versus

very nice! I like it!

But what you think about this?

Is it just me or does anyone else see the Terminator when looking at the front with those lights?

Very nice and admire the skill.

[T-Cut]

Originally Posted by mss

Is it just me or does anyone else see the Terminator when looking at the front with those lights?

Yes, the T4 I'd say.

TC