|
||
|
11th March 2019, 18:30 | #1 |
Loves to post
we have a 75 connoisseur cdt se saloon and a 75 conniosser se cdt tourer Join Date: Dec 2013
Location: Romford
Posts: 492
Thanks: 177
Thanked 62 Times in 52 Posts
|
Rear view camera on a tourer
Has anyone fitted one and where did you fit it as you cannot fit in the middle as you have the button to release the boot lid?
Sent from my iPhone using Tapatalk
__________________
I have been driving for 20 years and most of it is in rovers [SIGPIC][/SIGPIC] |
11th March 2019, 18:35 | #2 |
Gets stuck in
MG ZT+ CDTi Join Date: Feb 2014
Location: Wolverhampton
Posts: 632
Thanks: 166
Thanked 264 Times in 154 Posts
|
Drilled a hole in the middle of the bumper and fed the wires through the grommet on the drivers side for the towing electrics.
Bumper off job which is fairly straightforward as you need the feed the wires round the polystyrene bumper fillers . Not too bad a job to do Scott |
11th March 2019, 18:52 | #3 |
Loves to post
we have a 75 connoisseur cdt se saloon and a 75 conniosser se cdt tourer Join Date: Dec 2013
Location: Romford
Posts: 492
Thanks: 177
Thanked 62 Times in 52 Posts
|
I got this
To go with this So it’s quite a big camera compared to some. Sent from my iPhone using Tapatalk
__________________
I have been driving for 20 years and most of it is in rovers [SIGPIC][/SIGPIC] |
11th March 2019, 19:01 | #4 |
Avid contributor
Rover 75 Tourer 2.0 V6 LPG Join Date: Apr 2018
Location: Colchester
Posts: 210
Thanks: 4
Thanked 50 Times in 39 Posts
|
I fitted one to my Tourer between one of the number plate lights and one of the mounting screws of the chrome plinth thing,see pic.
Works fine but I need to readjust it's aim as all I can see on screen is the floor up to about five foot behind the Tourer Ooops,lol Will have to remove camera and change it's aim a bit when I get time Paul |
11th March 2019, 23:55 | #5 |
Gets stuck in
MGZT-T Join Date: Oct 2014
Location: Paignton
Posts: 617
Thanks: 278
Thanked 90 Times in 72 Posts
|
I'm about to fit mine, puting it off because I'm not sure about the best position.
I was thinking of fixing it on the centreline , on top of the number plate, Its a big plate and there is plenty of real estate there. Any thoughts on that? Phil |
Thread Tools | |
Display Modes | |
|
|