|
||
|
21st June 2016, 16:35 | #1 |
Posted a thing or two
Mazda 6 Join Date: Dec 2013
Location: Wigan
Posts: 1,384
Thanks: 266
Thanked 398 Times in 287 Posts
|
Navall 3 fitting - NOT wiring!
It's driving me mad - everything works fine BUT the bottom of the unit swings out from the dash no matter what I try (grinded/bent the brackets etc), I've had a Wince CE and a Navall 2 and they all fitted ok, or at least much better...... this one? nope. I took the AC unit out today and had a feel behind today and nothing is pushing it forward so I'm at a loss. I'd love two screws at the bottom to fix it as well as the two at the top but before I over engineer something has anyone got a cunning plan?
|
21st June 2016, 19:38 | #2 |
This is my second home
75 CDT Auto Tourer , Rover 45 , Astra, Zaffira, Chev Captiva Join Date: Mar 2011
Location: Wilts
Posts: 3,342
Thanks: 203
Thanked 436 Times in 360 Posts
|
Use the M6 bolt on the back of the unit to stabilize/line it up against the bulkhead.
I always take the air con controls out when removing /fitting the radio, it is a lot easier to sort the wires out. Craig.
__________________
Chrome skull caps, EGR cleaned (original housing), Mondeo lower mounting, 12V outlets in the armrest and tourer boot, cat fixed, working FBH, Lidl plenum covers, DD with reverse camera.New speakesr/Tweeters with MDF rings. wood dash, Memory leather seats, wooden finished steering and handbrake, Xenon headlights. |
21st June 2016, 22:01 | #3 |
Posted a thing or two
MG ZT 260 SE, ZS120, ZR105 Join Date: Mar 2014
Location: Peterhead
Posts: 1,375
Thanks: 203
Thanked 350 Times in 241 Posts
|
With the AC unit out, you can get a small screwdriver behind the two metal clips that secure the lower edge, simply prize the clips out to lock the unit in place. If that's not enough, insert a small wedge behind the clip to hold it in place
Sent from my iPad using Tapatalk |
21st June 2016, 22:04 | #4 | |
This is my second home
none but not gone Join Date: Mar 2013
Location: March, Cambs
Posts: 16,437
Thanks: 894
Thanked 4,247 Times in 3,025 Posts
|
Quote:
__________________
[SIGPIC][/SIGPIC]….All praise Bananaswan…. |
|
22nd June 2016, 11:13 | #5 |
Posted a thing or two
Mazda 6 Join Date: Dec 2013
Location: Wigan
Posts: 1,384
Thanks: 266
Thanked 398 Times in 287 Posts
|
|
22nd June 2016, 15:35 | #6 |
Posted a thing or two
Mazda 6 Join Date: Dec 2013
Location: Wigan
Posts: 1,384
Thanks: 266
Thanked 398 Times in 287 Posts
|
no spring clips on a Navall 3 apparently....
We now have a meccano bracket at the back, better but not good enough really for my OCD thing about expensive stuff needing to fit properly..... I have another idea however They should just fit without messing about like this though I won't be buying another one however and I regret buying this one really as it's probably now obsolete already as there is now a new one, I was quite happy with the Navall 2, the touch screen broke and although I haven't yet I may as well have stuck it or the £250 I paid for it new 2 years ago in the bin because apparently you can't fix it......... poor tbh Last edited by mystabe; 22nd June 2016 at 15:44.. |
22nd June 2016, 16:45 | #7 | |
Banned
None Join Date: Feb 2010
Location: Here on the Forum
Posts: 5,352
Thanks: 632
Thanked 822 Times in 573 Posts
|
Dave would the Spring clips resolve it?
I can send you a set Sean Quote:
|
|
22nd June 2016, 17:00 | #8 | |
This is my second home
none but not gone Join Date: Mar 2013
Location: March, Cambs
Posts: 16,437
Thanks: 894
Thanked 4,247 Times in 3,025 Posts
|
Quote:
I can see no clips on the body of the DD and there is no room to fit a cage.. The best resolve I could see with the rear of the unit being close to the firewall and the cabling just clearing, was to support the back / bottom edge of the case against a small shelf in the area and wedge it up to give a flush fit. The other alternative would be to tap out the case say M3 and fit a brace bar just behind the front bottom lip to trap it behind the consul facia...
__________________
[SIGPIC][/SIGPIC]….All praise Bananaswan…. |
|
22nd June 2016, 19:29 | #9 | |
Posted a thing or two
Mazda 6 Join Date: Dec 2013
Location: Wigan
Posts: 1,384
Thanks: 266
Thanked 398 Times in 287 Posts
|
Quote:
It is so annoying, I have no problem at all with with how it works (far from it in fact) and I know there is plenty of room behind for it to sit flush because if you push the bottom of the front in it's happy to do it....... getting it to stay there is seemingly another issue entirely however |
|
22nd June 2016, 21:14 | #10 | |
Banned
None Join Date: Feb 2010
Location: Here on the Forum
Posts: 5,352
Thanks: 632
Thanked 822 Times in 573 Posts
|
Quote:
I can get the clips , I WILL get the clips and send Ill check with Jeff tomorrow if we have spares Sean |
|
|
|