|
||
|
27th October 2009, 16:44 | #1 |
I really should get out more.......
BMW 1 series Join Date: Oct 2008
Location: Bolton
Posts: 2,094
Thanks: 12
Thanked 40 Times in 36 Posts
|
Kv6 Inlet Manifold / Vis Motors
I have been getting either a grinding or rattleing noise lately which i which i can hear from inside the car and i think it is coming from the inlet manifold. I have tested the power motor which is working fine but not done the balance one yet. I'm not sure if it is rattleing but if it is and its due to the valves coming away from the actuator arm what kind of revs can i expect to hear it as i hear the sound once i reach 2000 rpm?
|
27th October 2009, 16:48 | #2 |
Avid contributor
rover 75 2.0 v6-low 9 second pro street 100e Join Date: Jul 2009
Location: warwickshire
Posts: 144
Thanks: 0
Thanked 0 Times in 0 Posts
|
if it is the inlet,get it fixed asap,im currently running a KV5 motor due to parts of one of the butterflys not wanting to rattle around anymore and re-modelling an inlet valve.
|
27th October 2009, 17:19 | #3 |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,591
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
Rattle in the inlet manifold is only caused by worn joints on butterflies. or the rod being disconnected. If your power VIS has failed in the open position this exaggerates the noise.
If your power VIS is working and the wear is slight it can hide the noise totally. The Balance valve has no bearing on a rattle from a manifold i'm afraid.
__________________
Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident |
27th October 2009, 18:31 | #4 | |
I really should get out more.......
MGZTT2.5 V6 190+ SE 2002 Join Date: Oct 2009
Location: Gilfach-goch
Posts: 2,201
Thanks: 0
Thanked 8 Times in 4 Posts
|
Quote:
|
|
27th October 2009, 20:02 | #5 |
I really should get out more.......
BMW 1 series Join Date: Oct 2008
Location: Bolton
Posts: 2,094
Thanks: 12
Thanked 40 Times in 36 Posts
|
Where can i get a brand new manifold from? I know rimmers have them in stock for £629.34 but there used to be some cheaper ones on ebay for about £550. Was it a member on here that was selling them?
Last edited by ianfletcher; 27th October 2009 at 20:20.. |
27th October 2009, 20:34 | #6 |
This is my second home
MG ZT-T 190 Monogram Typhoon Join Date: Jan 2009
Location: Oxfordshire
Posts: 4,707
Thanks: 328
Thanked 557 Times in 443 Posts
|
Hi Ian. Sorry if it is the manifold. Only sold you that a few months back.
Power valves seemed ok at the time. I think E-car parts had them at £479. Not listing them on ebay at the moment but might be worth a try. http://stores.shop.ebay.co.uk/E-CAR-...0Q2em14?_pgn=1 Sorry. |
27th October 2009, 20:37 | #7 | |
I really should get out more.......
BMW 1 series Join Date: Oct 2008
Location: Bolton
Posts: 2,094
Thanks: 12
Thanked 40 Times in 36 Posts
|
Quote:
|
|
|
|