Radio ISO wiring Change

tony_fry · 1st August 2007, 16:05

I'v just brought a new radio and it has the old style wiring, does any one have a wiring diagram on the ISO plug so I can change it so I can connect up the new radio? The Speaker wires are Mouve, Green, White & Grey. I could play about with these getting it right, but there is also Orange , Red, black and a orange. I am not sure which is a constant feed and which is the ingition feed.

Please could sone one help me out?? please

MartinW · 1st August 2007, 18:39

On an ISO connector:
Main positive power - red
Memory positive back-up - Yellow (needs permanent power feed to store codes etc)
Aerial switched power - Blue
Dial illumination - Orange
Ground - black

Speakers are a solid colour and a solid colour with black trace as detailed below.
Front Left - White
Front right - Grey
Rear Left -Green
Rear right - Purple

tony_fry · 2nd August 2007, 06:49

Many thank sfor the information Martin. What a great club this is for information.

brutus · 20th August 2007, 19:44

Quote:

Originally Posted by MartinW

On an ISO connector:
Main positive power - red
Memory positive back-up - Yellow (needs permanent power feed to store codes etc)
Aerial switched power - Blue
Dial illumination - Orange
Ground - black

Speakers are a solid colour and a solid colour with black trace as detailed below.
Front Left - White
Front right - Grey
Rear Left -Green
Rear right - Purple

is there a picture of this somewere

1st August 2007, 16:05	#1
tony_fry I really should get out more....... BMW I3 Join Date: Nov 2006 Location: South East London Posts: 2,224 Thanks: 31 Thanked 77 Times in 61 Posts	Radio ISO wiring Change I'v just brought a new radio and it has the old style wiring, does any one have a wiring diagram on the ISO plug so I can change it so I can connect up the new radio? The Speaker wires are Mouve, Green, White & Grey. I could play about with these getting it right, but there is also Orange , Red, black and a orange. I am not sure which is a constant feed and which is the ingition feed. Please could sone one help me out?? please

1st August 2007, 18:39	#2
MartinW Newbie MG TF LE500 Join Date: Nov 2006 Location: Chester Posts: 2 Thanks: 0 Thanked 2 Times in 2 Posts	On an ISO connector: Main positive power - red Memory positive back-up - Yellow (needs permanent power feed to store codes etc) Aerial switched power - Blue Dial illumination - Orange Ground - black Speakers are a solid colour and a solid colour with black trace as detailed below. Front Left - White Front right - Grey Rear Left -Green Rear right - Purple

2nd August 2007, 06:49	#3
tony_fry I really should get out more....... BMW I3 Join Date: Nov 2006 Location: South East London Posts: 2,224 Thanks: 31 Thanked 77 Times in 61 Posts	Many thank sfor the information Martin. What a great club this is for information.