SEAT Leon Splitter on a ZT - Page 7

Beerhunter39 · 26th November 2010, 14:17

Fitted mine today and it looks great.Had to pay £25.07 from Lookers, the SEAT dealers in Stockport. A few tips for fitting.
At the centre of the spoiler, there are two pylons designed to clip into square holes in a bumper. I cut these off just above the internal strengthening rib. This gives both a flat surface and with a hole drilled through the rib an attachment point
Towards either end of the splitter, I removed some material on the inner edge that is best described as 'pointy bits' to allow the splitter to sit better as it follows the curve of the bumper.
Fitted using black self tapper with very large heads. I didn't count but I think I used twelve.
Keith.

Rovex · 26th November 2010, 15:53

Could someone who has a splitter please let us know how deep it is for the benefit of those of us who have concerns about getting up dropped kerbs ?

I'm looking to put a splitter on my wish list for Christmas, it looks great.

Keith · 26th November 2010, 18:37

It looks very smart now what about something for the rear to match?

NOCTURNAL · 27th November 2010, 00:48

Looks great!! and the yella is a credit to you!

MalteseMarc · 27th November 2010, 05:13

If anyone fits one to a facelift 75 could they post a picture, as i would be interested to see what it looks like, and then based on that i'll decide to fit one, or possibly not if it doesn't suit it.

simdel1 · 27th November 2010, 11:25

Hmm. It'll be intersting to see a 75 with this mod. It would probably look nice with a set of meteors. My wish list is getting way too long...

Yella Fella · 27th November 2010, 15:58

Quote:

Originally Posted by Rovex

Could someone who has a splitter please let us know how deep it is for the benefit of those of us who have concerns about getting up dropped kerbs ?

I'm looking to put a splitter on my wish list for Christmas, it looks great.

With the splitter fitted = 21.5cm clearance (measured under the headlamp)

Without a splitter = 24.0 cm clearance.

Only 2.5 cm of difference.

Brabus · 27th November 2010, 16:11

Splitter looks great £25 bargian might try it on the 75 MK1 to see what it looks like.yours looks very neat.

higgi23 · 27th November 2010, 18:33

Looks great,think I'll be trying this on the Green one.........

Tim_Burgess · 27th November 2010, 19:00

That does look good - might have to get one for SWMBO's MG-F

Maybe not "right" on my current 75 but on my old 75 Sport replica that would've looked good

27th November 2010, 05:13	#65
MalteseMarc Posted a thing or two Rover 75 CDTI connoisseur SE auto, 2004 Join Date: Sep 2008 Location: France Posts: 1,008 Thanks: 138 Thanked 70 Times in 52 Posts	If anyone fits one to a facelift 75 could they post a picture, as i would be interested to see what it looks like, and then based on that i'll decide to fit one, or possibly not if it doesn't suit it. __________________ [SIGPIC][/SIGPIC]

27th November 2010, 11:25	#66
simdel1 Posted a thing or two Rover 75 Connoisseur SE CDTi, Porsche 944 Lux, MGF Join Date: Nov 2009 Location: Stamford Posts: 1,088 Thanks: 4 Thanked 6 Times in 6 Posts	Hmm. It'll be intersting to see a 75 with this mod. It would probably look nice with a set of meteors. My wish list is getting way too long... __________________ Simon The Simdel1 Fleet: http://img593.imageshack.us/img593/447/sigmgf.png

27th November 2010, 16:11	#68
Brabus This is my second home 01 75 tourer cdt,1973 Rover 3500S,,1974 Rover 3500 Auto,1998 216 SE Coupe, 1968 Morris Minor 1000 Join Date: Jul 2010 Location: bangor/down Posts: 4,839 Thanks: 62 Thanked 184 Times in 158 Posts	splitter Splitter looks great £25 bargian might try it on the 75 MK1 to see what it looks like.yours looks very neat. __________________ Regards Neale [SIGPIC][/SIGPIC] 121st 75 Tourer to be made 15th 75 Tourer CDT Club SE to be made 36th 75 Tourer in Zircon Silver Metallic to be made Membership No 903 I was one of the 541

27th November 2010, 18:33	#69
higgi23 Loves to post MG ZT 190+ Comm no 17476 Join Date: Feb 2008 Location: Milton Keynes Posts: 407 Thanks: 33 Thanked 14 Times in 14 Posts	Looks great,think I'll be trying this on the Green one......... __________________ Member number 3177 http://www.lates600.com/index.html

27th November 2010, 19:00	#70
Tim_Burgess This is my second home 1999 75 Connoisseur SE 2.5, 2000 75 Classic SE 2.0, 2012 Lancia Delta 3, 2016 Dacia Sandero Ambiance Join Date: Jan 2007 Location: Kilcreggan Posts: 3,191 Thanks: 334 Thanked 334 Times in 162 Posts	That does look good - might have to get one for SWMBO's MG-F Maybe not "right" on my current 75 but on my old 75 Sport replica that would've looked good __________________ *The fact there's a highway to hell and only a stairway to heaven says a lot about anticipated traffic numbers.*.

26th November 2010, 14:17	#61
Beerhunter39 Avid contributor MG ZT-T Join Date: Jan 2009 Location: Cheshire Posts: 161 Thanks: 0 Thanked 0 Times in 0 Posts	Fitted mine today and it looks great.Had to pay £25.07 from Lookers, the SEAT dealers in Stockport. A few tips for fitting. At the centre of the spoiler, there are two pylons designed to clip into square holes in a bumper. I cut these off just above the internal strengthening rib. This gives both a flat surface and with a hole drilled through the rib an attachment point Towards either end of the splitter, I removed some material on the inner edge that is best described as 'pointy bits' to allow the splitter to sit better as it follows the curve of the bumper. Fitted using black self tapper with very large heads. I didn't count but I think I used twelve. Keith.

26th November 2010, 15:53	#62
Rovex Regular poster ZT-T+ CDTi Join Date: Oct 2010 Location: England Posts: 91 Thanks: 7 Thanked 4 Times in 3 Posts	Could someone who has a splitter please let us know how deep it is for the benefit of those of us who have concerns about getting up dropped kerbs ? I'm looking to put a splitter on my wish list for Christmas, it looks great.

26th November 2010, 18:37	#63
Keith This is my second home ZT400 Join Date: Oct 2006 Location: Ellesmere Posts: 5,948 Thanks: 0 Thanked 43 Times in 29 Posts	It looks very smart now what about something for the rear to match?

27th November 2010, 00:48	#64
NOCTURNAL Gets stuck in MG ZT-260SE Join Date: Nov 2006 Location: Norwich Posts: 645 Thanks: 17 Thanked 8 Times in 7 Posts	Looks great!! and the yella is a credit to you!