75 & ZT owners with duff MGF Heater Fan

maintenanceman · 2nd July 2013, 19:23

If anybody on here who's got an MGF with a non-working fan; usually 1st and 2nd speed non-working and wants to try the resistor fan repair. SEE HERE

http://forums.mg-rover.org/showthrea...40#post1224740

I've done mine and I've got half a roll of the wire (enough for a few+) left over if anybody wants to send me an SA(stamped)E for a try at it yourself. PM me - 1st come first served etc. I'll send enough for all 3 coils but you'll probably only need 2 coils.

I just cut the wire to length; wound it round a pencil then soldered it in. Took about 1 hour inc removal/refit. Works a treat. Do read the instructions carefully - glove box lid is 4 screws then lie on seat with head under dash. Small handled pozi needed to get rear mounting screw out.

Mountain Rover · 2nd July 2013, 20:13

love to do this (MGF no fan speed 1) but i haven't got soldering tools, nice offer tho

2nd July 2013, 19:23	#1
maintenanceman Gets stuck in 75 CDTi Connoisseur SE Tourer, MGF vvc, 1963 MGB Join Date: Aug 2012 Location: Cheltenham Posts: 658 Thanks: 38 Thanked 20 Times in 16 Posts	75 & ZT owners with duff MGF Heater Fan If anybody on here who's got an MGF with a non-working fan; usually 1st and 2nd speed non-working and wants to try the resistor fan repair. SEE HERE http://forums.mg-rover.org/showthrea...40#post1224740 I've done mine and I've got half a roll of the wire (enough for a few+) left over if anybody wants to send me an SA(stamped)E for a try at it yourself. PM me - 1st come first served etc. I'll send enough for all 3 coils but you'll probably only need 2 coils. I just cut the wire to length; wound it round a pencil then soldered it in. Took about 1 hour inc removal/refit. Works a treat. Do read the instructions carefully - glove box lid is 4 screws then lie on seat with head under dash. Small handled pozi needed to get rear mounting screw out.

2nd July 2013, 20:13	#2
Mountain Rover Regular poster Rover 75 Saloon Join Date: Dec 2012 Location: Redditch Posts: 78 Thanks: 2 Thanked 7 Times in 5 Posts	love to do this (MGF no fan speed 1) but i haven't got soldering tools, nice offer tho __________________ [SIGPIC][/SIGPIC] Rover 75 2.5 V6 Connoisseur SE Automatic British Racing Green with Deep Sea Green Personal Line