can someone point me in the direction of the bumper removal thread

[ProfDave]

Originally Posted by Dragrad

While the front end is off,.... your other possible list of jobs is:

1. Add second horn
2. Clean out washer bottle
3. Cover sharp edges where headlamp looms rest.
4. Cover & cable tie aircon pipe where it rubs on power steering pipe
5. Check fan & resistor if needed
6. Intake mod (optional)
7. Extend the wires to fan control box by 12"
8. CDT - Intercooler O-Rings
9. Position the drivers side headlamp loom to prevent chaffing

You've now made your CDT(i) that much more reliable for the future.

1; that is the other reason! I have a twin tone set off the bay
2; done it but will have another look
3/4; will do!
5; in the boot ready!
6; not bothered on that one!!
7? will look
8 done already bumper on
9; will look

main aim is replacing the lower grill

[thundercat]

have bookmarked this info