|
||
|
19th January 2021, 20:45 | #1 |
Regular poster
Connoisseur SE CDT Saloon Join Date: May 2013
Location: coventry
Posts: 74
Thanks: 27
Thanked 0 Times in 0 Posts
|
Fbh circulation pump
Does anyone know if it can be overhauled or of a cheap source of a replacement as mines making a God awful noise and the heater keeps cutting out.
Thanks Matt Last edited by madmatt; 19th January 2021 at 23:04.. |
19th January 2021, 20:56 | #2 | |
Posted a thing or two
Rover 75 CDTI Tourer Join Date: Nov 2014
Location: Great Bardfield, nr Braintree
Posts: 1,409
Thanks: 303
Thanked 436 Times in 317 Posts
|
Quote:
I think when I was after a replacement glow plug that I used Butler Technik for it. Not particularly cheap though. If I remember my glow plug was approx £60 |
|
19th January 2021, 23:23 | #3 |
Regular poster
Connoisseur SE CDT Saloon Join Date: May 2013
Location: coventry
Posts: 74
Thanks: 27
Thanked 0 Times in 0 Posts
|
Yeah they sell the pump for £118 but there out of stock Bowers have it for £127 which isn't cheap like you say. Also from looking at the pictures it looks like they've updated the design a little
|
20th January 2021, 06:40 | #4 |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,582
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
Try Contacting Trebor on here I know he can refurbish FBH's so he may be able to help
__________________
Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident |
20th January 2021, 13:46 | #5 |
Been round the block
75 Tourer Join Date: Apr 2009
Location: Cannock
Posts: 4,115
Thanks: 3
Thanked 189 Times in 121 Posts
|
The water pump impeller and chamber can be cleaned, a new O ring has to be fitted. The impeller is brushless, and free rotating when not powered. The Pierburg 9012751 has a sealed for life PCB at the bottom of the pump, so no repair.
Apart from that, NOT your water pump. |
20th January 2021, 15:02 | #6 |
Gets stuck in
MG ZT 135+ Diesel Auto Mk2. Nisan Micra 1.4 SVE Auto. Join Date: Apr 2015
Location: Wellingborough, Northamptonshire.
Posts: 832
Thanks: 196
Thanked 198 Times in 84 Posts
|
The original pumps a ridiculously expensive and Chinese copies are not recommended.
When mine failed it was cheaper to hunt down a faulty FBH and use the pump off that. With non working FBH's it's rarely the pump but the pcb so make good donors for the pump and glow pin.
__________________
Plenum spyhole mod. Powerflow backbox. 11 spoke alloys repainted Black Sparkle. Black Expansion tank. Drivers side cup holder. PPD carpeted heater box sides. Illuminated sun visors, PPD Door reflectors. PPD Seatbelt lower mount bolt covers. PPD Drivers grab handle. Cubby rechargeable torch and power socket. FBH retro-fitted. FBH engine pre-heater mod done. Electric rear Sunblind. Tow bar. Flip key. MGR towing mirrors and Saloon roof bars. Hand Built in Birmingham |
21st January 2021, 06:24 | #7 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,618
Thanks: 385
Thanked 552 Times in 328 Posts
|
When my pump packed in and I couldn't justify the cost of a new genuine one, I bought a Chinese copy. It fitted perfectly, great I thought! Unfortunately, it packed in within 12 months. I replaced it with another Chinese one, this pump didn't actually work at all, just became very hot , very quickly. I returned this one lol.
I looked for a decent alternative, which I found for less than half the price of a genuine. British made too, yes! . However, although it looked identical, the bore of the inlet didn't quite match the outlet of the FBH. After coming this far I wasn't going to be beaten. As the space between the pump inlet and FBH outlet is only a few cm's there was no room for a reducer. I eventually came up with the idea of mounting the water pump remotely. It now resides directly behind the expansion tank. I went all around the houses, but I now have a new, reliable water pump thats very easy to get at. Money spent? Probably not much less than buying a new genuine pump lol.
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s |
Thread Tools | |
Display Modes | |
|
|