wire up auto dipping int mirrow

steve107 · 29th April 2010, 09:22

how do you wire the int mirrow up i have had the light out but can not find the conection for it fit to ,i have the conector that came with the mirrow it has 3 wiers black,white/yellow,green/red .which is the best way to wire it to the car whith out taking car to bits ,i think my tourer had the basic wire loom put on as every time i thinkto add on there is never a scocket to fit it to

Parker · 29th April 2010, 09:57

Have a look at this thread it may help

http://www.the75andztclub.co.uk/foru...auto+mirror%22

steve107 · 29th April 2010, 14:42

justed been and checked only have a white conector a bottom of a frame .5 wires coming in and 4 coming out as far as i can see 2 go to int light and 2 go of it to head lining somwhere .had light out as well only 4 wires 2light 2 some where else , is it possible to make a loom and take a feed from some where else and join the reverse wire on the reverse switch

Greeners · 29th April 2010, 14:49

I've posted loads of bits on this....have a search, but basically, if the connector is not populated at the bottom of the A pillar on the drivers side, then run the wires down the passenger side and pick up the three feeds from the back of the fuse box.

steve107 · 6th May 2010, 18:33

got it to work took earth from back of light ,and feed from raideo,just got to find wire for reverse, is it possible to connect straight to switch under bonnet ,

Greeners · 6th May 2010, 18:42

Quote:

Originally Posted by steve107

got it to work took earth from back of light ,and feed from raideo,just got to find wire for reverse, is it possible to connect straight to switch under bonnet ,

Pick it up from the back of the fuse box.

29th April 2010, 09:22	#1
steve107 Loves to post 75 cdt tourer diesel Join Date: Jun 2008 Location: swinton rotherham Posts: 492 Thanks: 0 Thanked 0 Times in 0 Posts	wire up auto dipping int mirrow how do you wire the int mirrow up i have had the light out but can not find the conection for it fit to ,i have the conector that came with the mirrow it has 3 wiers black,white/yellow,green/red .which is the best way to wire it to the car whith out taking car to bits ,i think my tourer had the basic wire loom put on as every time i thinkto add on there is never a scocket to fit it to

29th April 2010, 09:57	#2
Parker This is my second home Jaguar XJ 3.0 V6 Auto (X350) & Hyundai Tuscon 2020 Join Date: Oct 2008 Location: Bridgend Posts: 10,342 Thanks: 69 Thanked 559 Times in 356 Posts	Have a look at this thread it may help http://www.the75andztclub.co.uk/foru...auto+mirror%22 __________________ http://www.the75andztclub.co.uk/foru...a585a72d1c.jpg "The only thing to do with good advice is pass it on. It is never any use to oneself" SOME VERY USEFUL LINKS SIMPLE DOOR MIRROR REPAIR FITTING CROFT DOOR FINISHERS FORUM RULES CLUB SHOP

29th April 2010, 14:49	#4
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	I've posted loads of bits on this....have a search, but basically, if the connector is not populated at the bottom of the A pillar on the drivers side, then run the wires down the passenger side and pick up the three feeds from the back of the fuse box. __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

29th April 2010, 14:42	#3
steve107 Loves to post 75 cdt tourer diesel Join Date: Jun 2008 Location: swinton rotherham Posts: 492 Thanks: 0 Thanked 0 Times in 0 Posts	justed been and checked only have a white conector a bottom of a frame .5 wires coming in and 4 coming out as far as i can see 2 go to int light and 2 go of it to head lining somwhere .had light out as well only 4 wires 2light 2 some where else , is it possible to make a loom and take a feed from some where else and join the reverse wire on the reverse switch

6th May 2010, 18:33	#5
steve107 Loves to post 75 cdt tourer diesel Join Date: Jun 2008 Location: swinton rotherham Posts: 492 Thanks: 0 Thanked 0 Times in 0 Posts	got it to work took earth from back of light ,and feed from raideo,just got to find wire for reverse, is it possible to connect straight to switch under bonnet ,