no front indicators/fog lights since doing abient temp sensor

[Den]

Originally Posted by Pete_901

Thank you il try that now and let you know!

Hi Pete - did you resolve your problem? Was it simply a fuse?
I have a similar problems with a nearside side light malfunction.

I'd appreciate a reply. Many thanks.

[Den]

Originally Posted by Arctic

HI Den.
I think you will find that ( Brake Light Switch, Short Circuit to Ground) error will always be there, it is on the T4 when ever I have seen the faults come up on any car, I could be wrong but I am sure a T4 guru will tell us.

If so it is sending you down the wrong track, note first line in the photo, and I have seen that on every car at the nano which goes on the T4

Did Pete the original PO sort his problem out ? it seems he never got back to tell us.

Hi Arctic
Thank you for your response. But, I still have the same problem and don't have a clue where to start. I've followed Klarzy's advice but not found any physical fault. I think the Brake light thing may be a "fail safe" i.e. if the Hall effect sensor fails the brake lights will stay on and a "bus" fault light will illuminate. Is there anyone on the Forum who can suggest a remedy.

I've replied to Pete_901 and await an answer.

[Den]

Thank you Klarzy and Arctic for your help - I've removed the front bumper and checked the looms and connectors (contact cleaner). I've not found any frayed or broken cables and the spotweld seams protecters are in place. Today, I've run TOAF and noticed that the ATC is not commuicating and Radio is not present (but it works). This has led me to examine the K-bus cable connectors. From RAVE, K-bus is WRY (white red yellow) so I'm going to check the connectors with WRY cables that connect to the Radio and ATC. I'll let you know but it may be next week. But please let me know if you've any other thoughts.