|
||
|
21st May 2018, 22:06 | #21 |
Regular poster
Rover 75 Saloon Join Date: Mar 2007
Location: Slough
Posts: 95
Thanks: 14
Thanked 7 Times in 7 Posts
|
no front indicators/fog lights since doing abient temp sensor
|
22nd May 2018, 22:56 | #22 | |
Regular poster
Rover 75 Saloon Join Date: Mar 2007
Location: Slough
Posts: 95
Thanks: 14
Thanked 7 Times in 7 Posts
|
Quote:
Thank you for your response. But, I still have the same problem and don't have a clue where to start. I've followed Klarzy's advice but not found any physical fault. I think the Brake light thing may be a "fail safe" i.e. if the Hall effect sensor fails the brake lights will stay on and a "bus" fault light will illuminate. Is there anyone on the Forum who can suggest a remedy. I've replied to Pete_901 and await an answer. |
|
10th June 2018, 00:37 | #23 |
Regular poster
Rover 75 Saloon Join Date: Mar 2007
Location: Slough
Posts: 95
Thanks: 14
Thanked 7 Times in 7 Posts
|
Problem with ATC and Door mirror control
Thank you Klarzy and Arctic for your help - I've removed the front bumper and checked the looms and connectors (contact cleaner). I've not found any frayed or broken cables and the spotweld seams protecters are in place. Today, I've run TOAF and noticed that the ATC is not commuicating and Radio is not present (but it works). This has led me to examine the K-bus cable connectors. From RAVE, K-bus is WRY (white red yellow) so I'm going to check the connectors with WRY cables that connect to the Radio and ATC. I'll let you know but it may be next week. But please let me know if you've any other thoughts.
|
|
|