|
|
|
|
|
|
||
|
|
||
12th March 2013, 12:10
|
#1 |
|
Avid contributor
2003 MG ZT 190+,(2005 Facelift R75 1.8T SE Conny now consigned to be a donor car) Join Date: Sep 2012
Location: Sidcup
Posts: 149
Thanks: 34
Thanked 4 Times in 4 Posts
|
Misfire problem - Cause sought.
Today's problem number 1.
Car has developed a slight hesitancy issue which intermittently is causing the engine light to come on. Sometimes it clears iteself, sometimes not. Using the OBD unit I have a code of P0302 - Cylinder 2 misfire. At the weekend I replaced all the plugs, both the coil packs and the HT leads. This hasn't solved the problem Any idea where I should be looking next ? Thanks.
__________________
Chris.  Work on the 1.8TNew pads &cs all round, Bonnet Catch Reversed, Plenums Cleaned, Renewed Selected Radiator Hoses, New Stainless Steel Twin Exhaust,Metal T-Piece, Head Skimmed and MLS Head Gasket, New Cambelt & Alternator Belt, New PRT & Water Pump, New Air Duct Hose, New Radiator, New plugs, coil packs & HT leads, Golden Radiator Resistor. Car then blew up and I gave up. Bought the ZT 190 instead ! |
|
|
 |
|
|
Linear Mode
