Scuttle panel also boot mat reqd

baldy1926 · 19th January 2015, 11:54

Hi
I was checking the plenums this morning and took the main cover off. the large one piece bit. It must have been brittle due to the frost and the end snapped off.
So does anyone have one.
I also need the base to the boot carpet as I have a saggy backside

.
I'm in London but will be around London, Norwich and Nottingham in the near future

ukmastiff · 19th January 2015, 14:23

Hi, I have a scuttle panel as opposed to the scuttle panel covers. Forgive me asking but I assume you don't mean just a scuttle panel cover or grille as they are sometimes called
( the clips always break) . I only have one side of those as yep the other one broke

I'm Near Bishops Stortford if you dont find one in a more convenient local.

Regards

Mas

Nev The Bear · 19th January 2015, 14:58

Quote:

Originally Posted by baldy1926

Hi
I was checking the plenums this morning and took the main cover off. the large one piece bit. It must have been brittle due to the frost and the end snapped off.
So does anyone have one.
I also need the base to the boot carpet as I have a saggy backside

.
I'm in London but will be around London, Norwich and Nottingham in the near future

Hello David

When I was looking for a boot board a while ago I could not find one that was better than what I already had. So I made a new one myself. I have attached a link below for you which is for my how to for making a new boot board.

http://www.the75andztclub.co.uk/foru...d.php?t=179264

Regards

Clyde

baldy1926 · 20th January 2015, 04:41

Hi
The bit i require is the piece which is the width of windscreen. The drivers corner -approx 2 inches has snapped off.

Kenton · 20th January 2015, 09:17

Quote:

Originally Posted by baldy1926

Hi
The bit i require is the piece which is the width of windscreen. The drivers corner -approx 2 inches has snapped off.

Give me a call, i have both

19th January 2015, 11:54	#1
baldy1926 Avid contributor mg zt v6 190. mgf 1.8 Join Date: Oct 2010 Location: Dereham Norfolk,and Nottingham Posts: 136 Thanks: 31 Thanked 2 Times in 2 Posts	Scuttle panel also boot mat reqd Hi I was checking the plenums this morning and took the main cover off. the large one piece bit. It must have been brittle due to the frost and the end snapped off. So does anyone have one. I also need the base to the boot carpet as I have a saggy backside. I'm in London but will be around London, Norwich and Nottingham in the near future

19th January 2015, 14:23	#2
ukmastiff Gets stuck in 2003 ZT-T CDTI '+' a ZT Join Date: Jun 2010 Location: N/E Herts Posts: 977 Thanks: 4 Thanked 42 Times in 36 Posts	Hi, I have a scuttle panel as opposed to the scuttle panel covers. Forgive me asking but I assume you don't mean just a scuttle panel cover or grille as they are sometimes called ( the clips always break) . I only have one side of those as yep the other one broke I'm Near Bishops Stortford if you dont find one in a more convenient local. Regards Mas __________________ ☆☆☆☆☆☆☆☆☆☆☆☆☆☆ Last edited by ukmastiff; 19th January 2015 at 14:27..

20th January 2015, 04:41	#4
baldy1926 Avid contributor mg zt v6 190. mgf 1.8 Join Date: Oct 2010 Location: Dereham Norfolk,and Nottingham Posts: 136 Thanks: 31 Thanked 2 Times in 2 Posts	Hi The bit i require is the piece which is the width of windscreen. The drivers corner -approx 2 inches has snapped off.