|
|
|
|
|
|
||
|
|
||
15th March 2020, 14:40
|
#1 |
|
Newbie
rover 75 Join Date: Feb 2020
Location: Hereford
Posts: 21
Thanks: 4
Thanked 4 Times in 1 Post
|
2003 rover 75 1800 petrol non start fuel problem
Hi all, car wont start, cranking over fine, no sound from fuel pump with ignition on. After reading several posts. I have swapped relay r3 and checked fuse 28 all good. I have no power at the purple and white wire that feeds the pump. If i were to remove the relay and put 12v power to the purple and white that feeds the pump the car should start (yes ?). My question is if this works which wire to the relay should have ignition feed so that i can run a new feed to that
Thanks for any advice in advance  |
|
|
|
|
Threaded Mode