Required urgently,plastic connector for door lock mechanism

Caskin · 7th April 2020, 15:29

Hi Guys Hope someone can help out,I have just had to change the left rear door locking mechanism due to actuator failure. Everything went fine until it came to refitting Exterior handle rod release. Then an important plastic fitting decided to split!!!
The rod comes from the interior locking mechanism ,connecting to the exterior handle internal activator by small plastic fitting(photo attached yellow arrows indicate said fitting).)The plastic fitting is not very large ,comprised of a short channel section to hold rod with a clip on the end to connect to external doors internal activator.

suzublu · 7th April 2020, 17:14

I think Steve (Arctic) did a modification for this somewhere

Arctic · 8th April 2020, 09:27

Quote:

Originally Posted by Caskin

Hi Guys Hope someone can help out,I have just had to change the left rear door locking mechanism due to actuator failure. Everything went fine until it came to refitting Exterior handle rod release. Then an important plastic fitting decided to split!!!
The rod comes from the interior locking mechanism ,connecting to the exterior handle internal activator by small plastic fitting(photo attached yellow arrows indicate said fitting).)The plastic fitting is not very large ,comprised of a short channel section to hold rod with a clip on the end to connect to external doors internal activator.

HI Derek.
Drop me your full name & address, I will check the shed in a short while and If I have any I will get one or a couple sent out to you, it is the rear passenger side you need yes. FOC

Caskin · 8th April 2020, 09:53

HI Steve Will send you PM with address details, but yes its passenger rear door left. Thanks for coming to my aid yet again....Take care of yourself All the best Derek

Arctic · 8th April 2020, 13:25

[QUOTE]

Quote:

Originally Posted by Caskin

HI Steve Will send you PM with address details, but yes its passenger rear door left. Thanks for coming to my aid yet again....Take care of yourself All the best Derek[/QUOTE

]

HI Derek.
Ok that great I have just found it and its on its way to you, hopefully you will receive it by the weekend

Caskin · 8th April 2020, 15:06

Steve :That's fantastic cannot thank you enough, if ever I can help you out as I do have a few bits and pieces let me know?
Just for general attention also have clean air bag for steering wheel which I cannot post but is up for collection? All the best Derek

8th April 2020, 09:53	#4
Caskin Gets stuck in Rover 75 tourer Join Date: Mar 2007 Location: Plymouth Posts: 807 Thanks: 472 Thanked 116 Times in 85 Posts	HI Steve Will send you PM with address details, but yes its passenger rear door left. Thanks for coming to my aid yet again....Take care of yourself All the best Derek __________________ Why weather the storm when you can learn to dance in the rain. Jobs done: Purchased 52 plate V6 connie Wedgewood blue,one owner,42000 on clock ,Virtually pristine.2017 service,new Goodyear tyres,Discs and pads all round,new battery,New cam and timing belts (3rd fitting in life of car),plus full normal service.exhaust 2016.First mod was to bonnet catch .Latest mod,triple heart pace maker. All brake lines changed for copper, all brake hoses changed for Pagid hoses.

8th April 2020, 15:06	#6
Caskin Gets stuck in Rover 75 tourer Join Date: Mar 2007 Location: Plymouth Posts: 807 Thanks: 472 Thanked 116 Times in 85 Posts	Steve :That's fantastic cannot thank you enough, if ever I can help you out as I do have a few bits and pieces let me know? Just for general attention also have clean air bag for steering wheel which I cannot post but is up for collection? All the best Derek __________________ Why weather the storm when you can learn to dance in the rain. Jobs done: Purchased 52 plate V6 connie Wedgewood blue,one owner,42000 on clock ,Virtually pristine.2017 service,new Goodyear tyres,Discs and pads all round,new battery,New cam and timing belts (3rd fitting in life of car),plus full normal service.exhaust 2016.First mod was to bonnet catch .Latest mod,triple heart pace maker. All brake lines changed for copper, all brake hoses changed for Pagid hoses.

7th April 2020, 17:14	#2
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,918 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	I think Steve (Arctic) did a modification for this somewhere