|
||
|
6th March 2010, 11:06 | #1 |
Big Frank
ZT260SE Join Date: Nov 2009
Location: Droxford
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
|
MGZT 260SE Four Wheel Alignment data
I'm lucky to have in addition to my ZT-T190 a MK1 ZT260SE and seek some technical Advice on the correct data needed to do four wheel alignment.
My MG garage has all the Rover MG software data but when it comes to the correct settings there's nothing on the ZT260 nor the Rover V8 - can anyone help? |
6th March 2010, 12:00 | #2 |
I really should get out more.......
260 SE vin 214 ( last mark 1 260 ) Join Date: Dec 2006
Location: Lancashire
Posts: 2,009
Thanks: 1
Thanked 8 Times in 4 Posts
|
Frank, a couple of threads over on the two sixties give the correct figures.
the later factory settings are below Front camber -1deg10' +-0deg 15' Front toe total +0deg 12' +-0deg 6' rear camber -2deg 05' +-0deg 15' rear toe total 0deg 36' +- 0deg 6' Thrust 0deg 00' +-0deg 6' Tyre pressures Front 34 psi Rear 36 psi Checked with a full tank of fuel, to correct for fuel level add to boot in kg. 3/4 full add 10 kg 1/2 full add 20 kg 1/4 full add 30 kg empty add 40 kg Note 1 litre of water weighs 1 kg the weight should be placed as far forward as possible."
__________________
[SIGPIC][/SIGPIC] |
|
|