Any Good???

matlongfellow · 11th March 2009, 10:50

Just found this on E Bay 370158736393 just wondered if this would any good as other MAF sensors ive seen are quite expensive and having become a victim to the "credit crunch"(redundant) i need to save some brass!! the part number that it replaces is MHK 101130

M3NDEREZ · 11th March 2009, 11:02

http://cgi.ebay.co.uk/ws/eBayISAPI.d...8736393&_rdc=1

Shameless spamming, I thank you

Seriously though, for the extra £19 or so, I'd go with RoverRon's tried, tested, and proven MAF.. All us burner boys use them..

matlongfellow · 11th March 2009, 12:13

You have to buy the other thing that go's with aswell dont you the MAFAM thing witch makes it about 100quid?? or am not reading rite??

efreeti · 11th March 2009, 12:29

That is correct, you need at least the MAFAM box to make Ron's maf alternative work.

I know it has been suggested in the past that these cheaper mafs are not great but I guess they are very cheap. I suppose it depends how much life your car has left in it as to whether or not they are worth the risk.

I am going to get one off Ron this week as it happens but only because I already have the Synergy2, otherwise I would be tempted to get one of the cheap ones as well. Might be worth checking if they have any kind of guarantee.

matlongfellow · 11th March 2009, 16:48

just been on ebay again too long on that MAF sensor seems ok its got a 12 month warranty with it for 37 quid got a lot of good feedback few moaning bout delivery times bout nothing too bad so i think i mite try it as long as if it is a NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- part it cant damage my engine also seen some cleaner on there not sure if this will work???

11th March 2009, 10:50	#1
matlongfellow Regular poster rover 75 tourer cdt club se wedgewood blue longbridge built! Join Date: Feb 2009 Location: Leeds Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts	Any Good??? Just found this on E Bay 370158736393 just wondered if this would any good as other MAF sensors ive seen are quite expensive and having become a victim to the "credit crunch"(redundant) i need to save some brass!! the part number that it replaces is MHK 101130

11th March 2009, 11:02	#2
M3NDEREZ Posted a thing or two R75 DUB Saloon Connoisseur CDT + Synergy2 Join Date: Dec 2008 Location: Earlswood, Surrey Posts: 1,344 Thanks: 0 Thanked 0 Times in 0 Posts	http://cgi.ebay.co.uk/ws/eBayISAPI.d...8736393&_rdc=1 Shameless spamming, I thank you Seriously though, for the extra £19 or so, I'd go with RoverRon's tried, tested, and proven MAF.. All us burner boys use them.. __________________ [SIGPIC][/SIGPIC] STILL WANTED: Black Leather & Chrome Auto Gearknob, Diesel Cruise ECU, EGR Bypass.

11th March 2009, 12:29	#4
efreeti Gets stuck in ZT-T CDT 130+ (04) & 75 Tourer CDT Auto (52) & a 1998 MGF (with HGF!) Join Date: Mar 2007 Location: Halifax Posts: 903 Thanks: 0 Thanked 1 Time in 1 Post	That is correct, you need at least the MAFAM box to make Ron's maf alternative work. I know it has been suggested in the past that these cheaper mafs are not great but I guess they are very cheap. I suppose it depends how much life your car has left in it as to whether or not they are worth the risk. I am going to get one off Ron this week as it happens but only because I already have the Synergy2, otherwise I would be tempted to get one of the cheap ones as well. Might be worth checking if they have any kind of guarantee. __________________ Jim Replace in tank fuel pump with Peugeot alternative Dismantle and re-fit interior and seats Retrofit electric memory seats without the loom All followed at your own risk! Available to borrow: I have a home made (tried and tested) Cam Locking tool for M47 should anyone need it.

11th March 2009, 12:13	#3
matlongfellow Regular poster rover 75 tourer cdt club se wedgewood blue longbridge built! Join Date: Feb 2009 Location: Leeds Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts	You have to buy the other thing that go's with aswell dont you the MAFAM thing witch makes it about 100quid?? or am not reading rite??

11th March 2009, 16:48	#5
matlongfellow Regular poster rover 75 tourer cdt club se wedgewood blue longbridge built! Join Date: Feb 2009 Location: Leeds Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts	just been on ebay again too long on that MAF sensor seems ok its got a 12 month warranty with it for 37 quid got a lot of good feedback few moaning bout delivery times bout nothing too bad so i think i mite try it as long as if it is a NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD- part it cant damage my engine also seen some cleaner on there not sure if this will work???