" How To " Replace the Rear Door Inner Waist Seal - Page 3

MalcolmG · 20th August 2018, 18:50

2004 Connoisseur SE Facelift Tourer, Cimarron Green. Have this problem on both rear doors. I am not very mechanically minded so is the seal formed of both the rubber and a piece of metal inside or is it just the rubber seal? Also, is there any difference between the Tourer and Saloon seals?

robbrooks · 19th March 2019, 13:24

What a mess! My rear window collapsed last week as a result of the window guide rusting. I also require the upper seal as this is in a bad state on both rear doors. The bubbling has been ignored for a few years, but now I can see what's happening! Please let me know if the upper waist height door seals are available anywhere. These will be required by everyone keeping their Rovers sooner or later, as it will become imperative for the cars security and weatherproofing.

ceedy · 19th March 2019, 13:58

As it only a trim to fill a gap ?..

thinking there might be a tee section plastic extrusion somewhere that may fit or be trimmed to fit ?

Anyone got the section dimensions ?

think these might not be wide enough and a bit angled ? ..

C.

Mike Trident · 17th April 2021, 17:19

Did anyone ever find a good solution?

Just notice both mine have large rust bubbles

Mike Trident · 18th April 2021, 23:30

Just moving it back up the list.

Did anyone ever find an alternative?

19th March 2019, 13:24	#22
robbrooks Gets stuck in Rover 75 CDT,160 remap: owner since new in December 2002: Mileage: June22 143,000 Join Date: Feb 2009 Location: Leeds Posts: 632 Thanks: 324 Thanked 102 Times in 67 Posts	waist height seal rear door. What a mess! My rear window collapsed last week as a result of the window guide rusting. I also require the upper seal as this is in a bad state on both rear doors. The bubbling has been ignored for a few years, but now I can see what's happening! Please let me know if the upper waist height door seals are available anywhere. These will be required by everyone keeping their Rovers sooner or later, as it will become imperative for the cars security and weatherproofing.

19th March 2019, 13:58	#23
ceedy This is my second home All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006 Location: Nr Sherborne But in Somerset.. Posts: 6,075 Thanks: 916 Thanked 1,214 Times in 768 Posts	As it only a trim to fill a gap ?.. thinking there might be a tee section plastic extrusion somewhere that may fit or be trimmed to fit ? Anyone got the section dimensions ? think these might not be wide enough and a bit angled ? .. C. __________________ The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's Last edited by ceedy; 19th March 2019 at 14:16..

17th April 2021, 17:19	#24
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,622 Thanks: 385 Thanked 552 Times in 328 Posts	Did anyone ever find a good solution? Just notice both mine have large rust bubbles __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s

18th April 2021, 23:30	#25
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,622 Thanks: 385 Thanked 552 Times in 328 Posts	Just moving it back up the list. Did anyone ever find an alternative? __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

20th August 2018, 18:50	#21
MalcolmG Newbie Rover 75 Tourer Join Date: Apr 2018 Location: Solihull Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	2004 Connoisseur SE Facelift Tourer, Cimarron Green. Have this problem on both rear doors. I am not very mechanically minded so is the seal formed of both the rubber and a piece of metal inside or is it just the rubber seal? Also, is there any difference between the Tourer and Saloon seals?