|
||
|
21st July 2017, 09:29 | #1 |
This is my second home
Rover 75 tourer Club CD/Limo Tints Join Date: Nov 2008
Location: Meneac
Posts: 6,759
Thanks: 5,007
Thanked 1,609 Times in 869 Posts
|
How about this for theory
As you may or may not know It depends if you have read my previous post.
I have a funny experience with my clutch with the operation. The pedal can be very light to start with but during the day the pedal will become heavy in operation quite noticeably. But at other times it will be heavy to operate from the start. It seems that the TAZU M/C has a problem to push the fluid down to the Slave similar to blowing down a tube with a kink in it,Remove the kink and you can blow down it quite easily.. If any of this makes sense to any one any ideas as to what it could be ?? I am going to try and flush the system out in case there is any debris blocking the M/C valves or holes.
__________________
] "I started out with nothing, and Ive still got most of it left!" Last edited by Number 6; 21st July 2017 at 09:31.. |
21st July 2017, 18:10 | #2 |
This is my second home
Rover 75 tourer Club CD/Limo Tints Join Date: Nov 2008
Location: Meneac
Posts: 6,759
Thanks: 5,007
Thanked 1,609 Times in 869 Posts
|
Nobody have an opinion on this ???
__________________
] "I started out with nothing, and Ive still got most of it left!" |
21st July 2017, 19:32 | #3 |
This is my second home
1.8t Tourer Join Date: Oct 2011
Location: Tanelorn
Posts: 4,830
Thanks: 956
Thanked 1,148 Times in 916 Posts
|
Does the heaviness come and go during a drive or only get heavier until the car has been parked long enough to cool down?
__________________
Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button |
21st July 2017, 20:34 | #4 | |
This is my second home
Rover 75 tourer Club CD/Limo Tints Join Date: Nov 2008
Location: Meneac
Posts: 6,759
Thanks: 5,007
Thanked 1,609 Times in 869 Posts
|
Quote:
I did think it was heat related but it can happen any time weather the car is hot or cold or weather the out side temp is hot or cold. Hence my comment about it felt like a restriction in the pipe work making it hard to press the pedal.
__________________
] "I started out with nothing, and Ive still got most of it left!" |
|
21st July 2017, 22:14 | #5 |
Avid contributor
2004 Rover75 Tourer Join Date: Dec 2014
Location: Winsford Cheshire
Posts: 147
Thanks: 41
Thanked 43 Times in 32 Posts
|
I'm wondering if the rubber on the push rod is distorting in the master cylinder hence sometimes it's heavy sometimes light. Alternatively could be a problem at the other end the slave cylinder. Just my thoughts.
__________________
Growing old gracefully in a 75...Real nameTony |
21st July 2017, 22:23 | #6 | |
This is my second home
1.8t Tourer Join Date: Oct 2011
Location: Tanelorn
Posts: 4,830
Thanks: 956
Thanked 1,148 Times in 916 Posts
|
Quote:
__________________
Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button |
|
22nd July 2017, 09:03 | #7 | |
This is my second home
Rover 75 tourer Club CD/Limo Tints Join Date: Nov 2008
Location: Meneac
Posts: 6,759
Thanks: 5,007
Thanked 1,609 Times in 869 Posts
|
Quote:
Also do you think it would benefit to flush both ways ? John
__________________
] "I started out with nothing, and Ive still got most of it left!" |
|
22nd July 2017, 09:33 | #8 | |
This is my second home
1.8t Tourer Join Date: Oct 2011
Location: Tanelorn
Posts: 4,830
Thanks: 956
Thanked 1,148 Times in 916 Posts
|
Quote:
Don't let it overflow, take as much out of the master cylinder as possible, use a syringe with a long flexible pipe or something similar to suck as much of the fluid out as you can (still use plenty of rags to catch spillage and keep the carpets clear of fluid). then reverse bleed the system without letting the master over flow - repeat draining master and reverse bleeding untill you are seeing only clean fresh fluid in the master. you'll need some way of pumping hydraulic fluid into the bleed nipple from the slave (use plenty of rags under this) - if you've got an oil gun with a proper oil nipple adaptor on it then clean it out and use that. It may actually be easier in the long run to remove the master cylinder, strip it down and clean it and then re-assemble with clean fluid and then bleed the clutch normally.
__________________
Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button |
|
22nd July 2017, 10:04 | #9 | |
This is my second home
Rover 75 tourer Club CD/Limo Tints Join Date: Nov 2008
Location: Meneac
Posts: 6,759
Thanks: 5,007
Thanked 1,609 Times in 869 Posts
|
Quote:
__________________
] "I started out with nothing, and Ive still got most of it left!" |
|
|
|