|
||
|
|
7th July 2020, 23:29 | #1 |
Avid contributor
Rover 75 Saloon Join Date: Nov 2018
Location: Sydney
Posts: 176
Thanks: 82
Thanked 41 Times in 21 Posts
|
Rattling door lock knobs
Hi - recently it seems all 4 door lock knobs on my 75 have started rattling somewhat - noticeable of course on bumpy roads. A little less noticeable if all of them are in the lock position. Is this a common thing? Has some foam padding disintegrated in the door?
|
8th July 2020, 00:54 | #2 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
Putting some foam or similar behind them, could cause issues with the sticking, although a strip of foil backed sound deadening material may work.
__________________
It is not gloss primer .............. it is duct tape silver! |
|
8th July 2020, 06:41 | #3 |
I really should get out more.......
MG ZT-T 260 Join Date: Feb 2016
Location: Witney
Posts: 2,504
Thanks: 6
Thanked 910 Times in 571 Posts
|
The straws from Burger King work well, they are a little bigger than the ones from McDonalds or at least they were when I did mine a couple of years ago.
|
8th July 2020, 06:59 | #4 |
This is my second home
None Join Date: Feb 2013
Location: None
Posts: 5,556
Thanks: 465
Thanked 1,161 Times in 924 Posts
|
I've used heat shrink.
|
8th July 2020, 07:40 | #5 |
Avid contributor
Rover 75 Saloon Join Date: Nov 2018
Location: Sydney
Posts: 176
Thanks: 82
Thanked 41 Times in 21 Posts
|
Thanks all - will try the straw fix. So what actually happens to cause the problem?
|
8th July 2020, 15:31 | #6 |
This is my second home
BMW 330d Tourer, MG ZT 180 SE XPG, VW Polo 6R 1.2 TDI Bluemotion Join Date: Jul 2011
Location: York
Posts: 6,022
Thanks: 363
Thanked 574 Times in 319 Posts
|
I used a strip of that fake alcantara with spray adhesive applied to the back
|
8th July 2020, 21:40 | #7 |
This is my second home
None Join Date: Feb 2013
Location: None
Posts: 5,556
Thanks: 465
Thanked 1,161 Times in 924 Posts
|
I think the hole in the plastic housing enlarges with use, enough clearance to cause a rattle. You then get a plastic plunger rattling against a plastic housing, the fix being covering the plunger with rubber to cushion this effect.
|
|
|