Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club General Forum
Register FAQ Image Gallery Members List Calendar
Notices

Reply
 
Thread Tools Display Modes
Old 28th May 2013, 08:22   #1
hinged_bap
Gets stuck in
 
75 CDT Conn SE Auto saloon

Join Date: Jun 2010
Location: Southampton
Posts: 773
Thanks: 134
Thanked 104 Times in 81 Posts
Default colour code of springs for the 75

I see that front springs for the 75 have colour codes, presumably they're different because of the varying engine weights and the feel of the suspension ( ZT's stiffer), can anyone advise the correct code for a 2001 diesel pls.

The reason I ask is that if i go here:

http://www.rimmerbros.co.uk/Item--i-GRID001542

the 75 diesel doesn't seem to be listed. The nearest is reb000890 which is NLA and to use REB000890SLP which is MG. So, i'm a bit miffed. I only want one and want it to match whats already on there, ive checked for paint on the existing and its long gone.
TIA
Bap
hinged_bap is offline   Reply With Quote
Old 28th May 2013, 09:11   #2
trikey
Premium Trader
 
trikey's Avatar
 
Rover 75

Join Date: Nov 2010
Location: Devon
Posts: 33,770
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
Default

Pull the rear seat base up, there is a white sticker with a code for the springs on
__________________
Lest we forget..
trikey is offline   Reply With Quote
Old 28th May 2013, 09:38   #3
T-Cut
This is my second home
 
Rover75 and Mreg Corsa.

Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
Default

The whole shebang: http://www.rimmerbros.co.uk/content-...le-Information

Scroll to around half way down for spring/damper info.

TC
T-Cut is offline   Reply With Quote
Old 28th May 2013, 09:38   #4
bartandrose
Loves to post
 
bartandrose's Avatar
 
Rover 75 CDTi Contemporary SE

Join Date: Feb 2010
Location: Southampton
Posts: 333
Thanks: 1
Thanked 3 Times in 2 Posts
Default

I've recently fitted these, my originals were blue/green. These are the same spring rate but 15mm shorter than my originals.
Ride is great, just a tad lower.

http://www.ebay.co.uk/itm/ROVER-75-F...item565043dc89

I did fit as a pair which is highly recommended. (I presume one of yours is bust.................so the other won't be too clever)

Have a look at Norfies very informative post here.
http://www.the75andztclub.co.uk/foru...=N%2Fmm&page=2
bartandrose is offline   Reply With Quote
Old 28th May 2013, 12:02   #5
hinged_bap
Gets stuck in
 
75 CDT Conn SE Auto saloon

Join Date: Jun 2010
Location: Southampton
Posts: 773
Thanks: 134
Thanked 104 Times in 81 Posts
Default

thx for the leads chaps, i think i'm ok now, ( those ebay ones look fave).
hinged_bap is offline   Reply With Quote
Old 5th June 2013, 19:37   #6
hinged_bap
Gets stuck in
 
75 CDT Conn SE Auto saloon

Join Date: Jun 2010
Location: Southampton
Posts: 773
Thanks: 134
Thanked 104 Times in 81 Posts
Default

Quote:
Originally Posted by hinged_bap View Post
thx for the leads chaps, i think i'm ok now, ( those ebay ones look fave).
i spoke to soon. There were some very informative links in this thread. I checked the label under the rear seat and i have PM JM code front springs or
Green/Grey and equate to these: ( note the size )

Green/Grey 399.08 mm dia 13.35mm, 19.3 N/mm

that info gleaned from here:

http://www.the75andztclub.co.uk/foru...=N%2Fmm&page=2

but if i go here:

http://www.rimmerbros.co.uk/content-...le-Information

these springs have p/n REB101440 which is NLA but to use REB101440SLP instead ( which isn't colour coded at all ).

so, back to the ebay listing here ( as mentioned previously )
http://www.ebay.co.uk/itm/3708109998...84.m1438.l2649

the seller says they're purple yellow which is:
Purple/Yellow 348.66mm dia 14.75mm 23.5 N/mm <<< nearly 2" shorter and fatter wire

but he also says he has purple/brown and purple/pink which are:

Purple/Brown 362.06mm dia 14.75mm 23.5 N/mm
and

Purple/Pink 375.53mm dia 13.80mm 19.3 N/mm

now, according to :
http://www.rimmerbros.co.uk/content-...le-Information

purple pink is for 1.8 petrol
and purple/brown is ifor diesel but note the dimensions:
Purple/Brown 362.06mm dia 14.75mm 23.5 N/mm

which are different dimensions to Green/Grey like ive fitted but are, according to :

http://www.rimmerbros.co.uk/content--name-Mg-Rover-75-And-Mgzt-Vehicle-Information


are for a diesel but also see that that Green/grey used the damper p/n RND105360/70 whereas:
the purple/brown spring used damper p/n RNB000400/410.


the last thing i want to do is order these springs, strip it all down and find they dont fit. any thoughts
hinged_bap is offline   Reply With Quote
Old 5th June 2013, 20:10   #7
T-Cut
This is my second home
 
Rover75 and Mreg Corsa.

Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
Default

Complicated innit!
Frankly, the MGR colour coding is beyond the understanding of mere mortals. If the eBay seller says they are for your car, then they'll fit OK. Collating colour codes with damper codes is the way to lose yer sanity IMO. Best-of-British-Rover probably has the encryption key which enables them to say what they say about it all. Many owners simply buy after market springs as cheap as they can find them. They come with no colours and no codes.

TC
T-Cut is offline   Reply With Quote
Old 5th June 2013, 21:07   #8
Typhoon190
This is my second home
 
MG ZT-T 190 Monogram Typhoon

Join Date: Jan 2009
Location: Oxfordshire
Posts: 4,707
Thanks: 328
Thanked 557 Times in 443 Posts
Default

Just beware of aftermarket springs. I bought a second spring, to match the one that came with my 75 (mot failure) when I bought it.

The ride height was far too high, and the ride to harsh, which may have contributed to a shattered top mount bearing, which was also new. A very expensive lesson.

The incorrect springs were from this company, but supplied through a motor factor. http://www.amkauto.co.uk/suspension/coils.asp
Typhoon190 is offline   Reply With Quote
Old 6th June 2013, 06:16   #9
norfie
Avid contributor
 
norfie's Avatar
 
Rover 75 1.8T saloon

Join Date: Nov 2011
Location: Dunstable
Posts: 206
Thanks: 0
Thanked 8 Times in 6 Posts
Default

Just a quick guide into spring colour codes:
Green / any other colour = saloon (R40)
Purple / any other colour = estate (R41)
Brown / any other colour = MG (saloon and estate)
(early cars will have a single colour (pre estate and MG) so use Green / (your colour) for replacements)
Front dampers:
RND 105321 / 331 = R40 (K1.8)
RND 105340 / 350 = R40 (KV6)
RND 105360 / 370 = R40 (M47 diesel)
RNB 000400 / 410 = R41 (petrol and diesel)

Last edited by norfie; 6th June 2013 at 07:12.. Reason: early car info added
norfie is offline   Reply With Quote
Old 6th June 2013, 07:41   #10
arthur2k3
Regular poster
 
rover 75 classic cd 02 plate bmw 2.0

Join Date: Oct 2012
Location: norwich
Posts: 93
Thanks: 8
Thanked 1 Time in 1 Post
Default

Hi norfie I have a 45 plate 2.0 cdti what would my car engine be please. ie m47?
__________________
THINGS DONE
Egr bypass
Complete service including pcv
led interior lighting
160Remap
Bonnet catches
Spring assisters

THINGS TO DO
Spy hole mod
New fan
Handbrake mod
Auto boot

BE GOOD TO EACH OTHER. YOU ARE ONLY HEAR FOR A SHORT WHILE.





.

.
arthur2k3 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:26.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd