|
||
|
13th December 2015, 17:05 | #1 |
Posted a thing or two
Rover 75 CDT Join Date: Aug 2014
Location: Brighton
Posts: 1,786
Thanks: 215
Thanked 244 Times in 205 Posts
|
replacing rear door door
Hello all,
how would I go about removing a door? I have to replace the rear door of my car as it has broken window and dent and thought it would be easier to replace the whole thing. Do I need to be cutting cables and soldiering when I get the donor door on or is it a plug and socket? (on the flex). Any help appreciated.
__________________
Mods done: 160 upgrade, EGR bypass, Viton "O" rings, Fitted 16" unions, cleaned manifold, uprated air filter, fog lights, better bulbs, upgraded ICE and full speaker set up. |
13th December 2015, 17:08 | #2 | |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,773
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
Quote:
Two small circlips to remove on each door hinge, pull the rubber grommet away from the door pillar and unclip the wires at the plug, undo the 10mm bolt that holds the spring clip to the door pillar then lift the door away from the car.. dead easy.
__________________
Lest we forget..
|
|
13th December 2015, 17:13 | #3 |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,591
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
First thing to do is lower the window around 50mm before you do anything else. If you can do this on the replacement as well it will make the job a lot easier.
__________________
Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident |
|
|