|
||
|
12th May 2017, 06:41 | #1 |
Regular poster
MG ZT Join Date: Oct 2016
Location: Easington Lane
Posts: 58
Thanks: 7
Thanked 8 Times in 3 Posts
|
Xtrons steering wheel controls
Good morning, i have a xtrons DD unit and would like to connect up the steering wheel controls.
It is 53 plate ZT and has the infrared box with three wires going to it. I have key 1 and key 2 from the headunit loom and was wondering if any one has been able to get their SWC to work? Many thanks |
12th May 2017, 08:06 | #2 | |
This is my second home
Audi Q3 TDI S-Line Quattro Join Date: Jul 2007
Location: Clacton On Sea/On the boat somewhere
Posts: 51,137
Thanks: 9,890
Thanked 12,235 Times in 8,232 Posts
|
Quote:
DO NOT use the green/white wire as that is a 12 volt positive feed. make sure that is taped up so it can't touch anything! Once connected you will need to find the menu on your unit to set/program the steering wheel controls up
__________________
Jeff. |
|
12th May 2017, 10:32 | #3 |
Regular poster
MG ZT Join Date: Oct 2016
Location: Easington Lane
Posts: 58
Thanks: 7
Thanked 8 Times in 3 Posts
|
Thank you.
Does that mean I can cut the infrared box out completely? |
12th May 2017, 10:38 | #4 |
This is my second home
Audi Q3 TDI S-Line Quattro Join Date: Jul 2007
Location: Clacton On Sea/On the boat somewhere
Posts: 51,137
Thanks: 9,890
Thanked 12,235 Times in 8,232 Posts
|
Yep......but make sure that green and white wire can't short out against anything
__________________
Jeff. |
13th May 2017, 21:53 | #5 |
Regular poster
MG ZT Join Date: Oct 2016
Location: Easington Lane
Posts: 58
Thanks: 7
Thanked 8 Times in 3 Posts
|
Well I tried this today and it didn't work.
On the grey iso block which has the power ground etc there is two wires coming for the car side which if I touch one of the key wires to, it brings up the menu to bind the controls. Unfortunately still doesn't work. |
|
|