|
||
|
24th May 2021, 09:20 | #11 |
Gets stuck in
'51 Rover 75 2.5 V6 Conn. Purchased 02/05 Join Date: Dec 2006
Location: Whitby
Posts: 571
Thanks: 8
Thanked 33 Times in 22 Posts
|
Dorchester2, yes this is the cable:
https://www.ebay.co.uk/itm/174768878...cAAOSwvpNgnqIB This is the cable I've just bought from Ebay, and it does not seem to be fully functional. In Android, I get engine and gearbox ecu readings, and meaningful fault listings. Other modules "communicate", and report faults, but does not list them. I am trying to discover ABS faults, and I am getting nowhere! I've tried the TOAF Windows version on my Windows 10 laptop, and, using the same cable, everything connected to COM 1 after some efforts. However, none of the modules are being read properly, throwing up errors, or "module not found" messages. I am getting very frustrated. Is this the right cable? It is advertised as being TOAF compatible, and yet it seemingly does not work properly. Should I try one of those switchable BMW cables being advertised? Can anyone recommend a cable which definitely reads all modules in the Android app? Many thanks! Last edited by davidbooker; 24th May 2021 at 09:23.. |
24th May 2021, 10:40 | #12 |
Gets stuck in
MG ZT 2.5 V6 Auto Tourer (Elizabeth) / MG ZT CDTI (Farage) Join Date: Jan 2017
Location: St Helens
Posts: 688
Thanks: 339
Thanked 109 Times in 89 Posts
|
I've got one coming out to me this week I'll let you know if I have any joy. Tried a VAG cable and soldered the pins but didn't work and I've got airbag light on and MOT next Monday so splashed the cash on the BMW cable hoping it will work
|
24th May 2021, 17:35 | #13 |
Gets stuck in
'51 Rover 75 2.5 V6 Conn. Purchased 02/05 Join Date: Dec 2006
Location: Whitby
Posts: 571
Thanks: 8
Thanked 33 Times in 22 Posts
|
The Ebay seller has just told me that the cable he's advertising as TOAF compatible does not have pins 7 and 8 shorted. This is probably why it does not work properly! He's agreed to exchange it with one that does, so I await its arrival with baited breath........
|
26th May 2021, 20:14 | #14 |
Gets stuck in
MG ZT 2.5 V6 Auto Tourer (Elizabeth) / MG ZT CDTI (Farage) Join Date: Jan 2017
Location: St Helens
Posts: 688
Thanks: 339
Thanked 109 Times in 89 Posts
|
I got the BMW cable and it works fine - I had to change the com port tho. The instructions were on a readme file which came with it. Go to device manager, expand ports, check the USB if it says COM 1 you're fine if not right click on it, properties, advanced in one of the tabs (can't remember which sorry) select COM 1 and change the latency figure to 1. The cable only started working when I did this.
The only trouble is it reads almost everything apart from my airbag module, which is where I have the fault. Mine's a 2005 and having done a bit more digging on here I can see this is a common story - TOAF will read the older car airbag systems but not the newer ones. As it turns out, in a moment of serendipity, my son somehow managed to kick a teddy bear under my seat when he was getting out of his car seat behind me, and the light has gone off. Hopefully it stays off for the MOT! |
26th May 2021, 22:14 | #15 |
This is my second home
Rovers 75 & 25 Join Date: Oct 2010
Location: Wearside
Posts: 4,522
Thanks: 543
Thanked 709 Times in 511 Posts
|
Did this using my Android tablet and for some reason Google/the app says something to the effect that the app is not compatible with my device. As a result I might stick with the diagnostic kit that I have (Delphi) and just look at powering my windows laptop that the software is on via a car's 12V system.
|
27th May 2021, 07:23 | #16 | |
incurable Rover addict
Rover 75 Saloon V6 2.5 1999 - Rover 25 1.4 2002 - Rover 214i cab 1994 - Rover P5b coupe 1968 Join Date: Sep 2017
Location: Bioule. South West of France.
Posts: 1,643
Thanks: 612
Thanked 385 Times in 223 Posts
|
Quote:
Thank you for all your explanations. Could you provide a link to your BMW cable?
__________________
Rover 75 V6 2.5 Auto Connie born 1 July 1999, 24 kOhms resistor, 10 kOhms manual starter, full E85, modified airbox, full derestricted SS exhaust line, power & torque remap -> 202 bhp
|
|
27th May 2021, 19:10 | #17 |
NI/ROI RS
ZT-T 190 / 75 Diesel x3 / 6 door limo / 216 Cabby / Rover 25 van Join Date: May 2009
Location: Antrim
Posts: 8,103
Thanks: 299
Thanked 1,046 Times in 568 Posts
|
I was part of the TOAF testing group.
Just get this lead for 100% guarantee it works. https://www.ebay.co.uk/itm/143973572531 No wiring or messing about, works perfectly. You then will need a converter from USB to usb c that has the correct chipset in it. Get one of these. https://www.amazon.co.uk/dp/B081S27N...ing=UTF8&psc=1 I wasted a lot of time and money, with no replies from the TOAF team asking what works and what doesn't, I wanted an out of the box solution. I also tested it on android software as far back as Android 6.1 with no problems. I did have issues with otg adaptors from USB to usb micro (older Samsung charging ports pre USB c) and it kept dropping out a lot, therefore I wouldn't recommend anything. Those two, are 100% out of the box exactly what you need for android compatible setup. Just remember to check your android devices usb port setup, incase you have it in the settings to check you have "enable otg" activated. After that your flying. I tested my combo on the following 2001 75 diesel 2002 75 diesel 2003 75 diesel auto lhd 2005 75 diesel auto 2003 1.8 manual 2002 190 ztt 2003 2.0 v6 75 2002 190 zt 2000 1.8 manual 2004 1.8t The diesels gave me access but still limited as that seems to be software over anything, last build is pretty good for kv6 so far.
__________________
Cheers, Colin Robson Rover Repair on Youtube DISCOUNTED MTEC BRAKES FOR ALL MG ROVER'S Braided hoses, more coating and pad options for 2024 Last edited by Robson Rover Repair; 27th May 2021 at 19:16.. |
27th May 2021, 20:34 | #18 |
incurable Rover addict
Rover 75 Saloon V6 2.5 1999 - Rover 25 1.4 2002 - Rover 214i cab 1994 - Rover P5b coupe 1968 Join Date: Sep 2017
Location: Bioule. South West of France.
Posts: 1,643
Thanks: 612
Thanked 385 Times in 223 Posts
|
That's what I call a proper masterly lecture: short but comprehensive and efficient!
Thank you.
__________________
Rover 75 V6 2.5 Auto Connie born 1 July 1999, 24 kOhms resistor, 10 kOhms manual starter, full E85, modified airbox, full derestricted SS exhaust line, power & torque remap -> 202 bhp
|
29th May 2021, 19:59 | #19 | |
Gets stuck in
MG ZT 2.5 V6 Auto Tourer (Elizabeth) / MG ZT CDTI (Farage) Join Date: Jan 2017
Location: St Helens
Posts: 688
Thanks: 339
Thanked 109 Times in 89 Posts
|
Quote:
https://www.ebay.co.uk/itm/INPA-K-Dc....m46890.l49286 |
|
30th May 2021, 23:09 | #20 |
This is my second home
Rovers 75 & 25 Join Date: Oct 2010
Location: Wearside
Posts: 4,522
Thanks: 543
Thanked 709 Times in 511 Posts
|
Apparently my device running Android 5.1 Lollipop, it is a Hipstreet Pilot 10" tablet, is not compatible with it. My intention was to try it on my Rover 25 1.4, it being mems 3. Wonder if anyone else has tried toaf on other mems 3 variant cars.
|
|
|