Stabilizer Link ??? easy job ??

Mangizmo · 10th November 2019, 08:05

I had an annoying knocking sound from my front suspension which was rectified at modest cost by my local garage, they told me it was a "stab link" all has been well for about 6 months but now the noise is slowly returning, I intend to replace these components myself so I know its been done, is it a straightforward job ?

V

Lee T · 10th November 2019, 08:16

https://www.the75andztclub.co.uk/for...ll+bar+top+nut
It's not a difficult job, unless you have a fight with the top nut but a grinder overcomes that easily. Just make sure you tighten the nuts with the weight of the car on the wheel or hub, I used an axle stand under the hub.

10th November 2019, 08:05	#1
Mangizmo Gets stuck in Rover 75 Tourer Join Date: Aug 2013 Location: Barnstaple Posts: 764 Thanks: 154 Thanked 235 Times in 127 Posts	Stabilizer Link ??? easy job ?? I had an annoying knocking sound from my front suspension which was rectified at modest cost by my local garage, they told me it was a "stab link" all has been well for about 6 months but now the noise is slowly returning, I intend to replace these components myself so I know its been done, is it a straightforward job ? V

10th November 2019, 08:16	#2
Lee T Gets stuck in MG ZT Join Date: Jul 2014 Location: Liverpool Posts: 850 Thanks: 180 Thanked 248 Times in 189 Posts	https://www.the75andztclub.co.uk/for...ll+bar+top+nut It's not a difficult job, unless you have a fight with the top nut but a grinder overcomes that easily. Just make sure you tighten the nuts with the weight of the car on the wheel or hub, I used an axle stand under the hub. __________________ [SIGPIC][/SIGPIC]