Ride Height

sparkymint · 20th October 2019, 14:45

My 2005 CDT Auto Saloon could do with a bit more ground clearance.
Has anybody tried ( mistakenly or intentionally) CDT Tourer front springs (purple brown REB000480 ) on a CDT Auto Saloon.

T-Cut · 20th October 2019, 15:54

Quote:

Originally Posted by sparkymint

My 2005 CDT Auto Saloon could do with a bit more ground clearance.

Do you mean it's lower than spec or you'd prefer it so be higher than spec?

TC

sparkymint · 20th October 2019, 18:04

Thanks for the Info.
Just measured it at 1390 mm so it is a little short for a 75.
It had new rear springs fitted just before I acquired it from Brecon Motors at about 50k now at 90k
It would be nice to get it a little above spec as it now travels a farm track and has worn through one belly pan.
Its about ready for a front suspension overhaul in any-case so would be an opportunity to experiment.

20th October 2019, 14:45	#1
sparkymint Newbie Rover 75 saloon Join Date: Apr 2015 Location: Hereford Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Ride Height My 2005 CDT Auto Saloon could do with a bit more ground clearance. Has anybody tried ( mistakenly or intentionally) CDT Tourer front springs (purple brown REB000480 ) on a CDT Auto Saloon.

20th October 2019, 18:04	#3
sparkymint Newbie Rover 75 saloon Join Date: Apr 2015 Location: Hereford Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Ride Height Thanks for the Info. Just measured it at 1390 mm so it is a little short for a 75. It had new rear springs fitted just before I acquired it from Brecon Motors at about 50k now at 90k It would be nice to get it a little above spec as it now travels a farm track and has worn through one belly pan. Its about ready for a front suspension overhaul in any-case so would be an opportunity to experiment. Last edited by sparkymint; 20th October 2019 at 18:15..