|
||
|
13th September 2019, 09:49 | #1 |
Posted a thing or two
MGZT Join Date: Jul 2015
Location: Berkshire
Posts: 1,281
Thanks: 1,738
Thanked 299 Times in 216 Posts
|
KV6 overheating.Coolant cap.
My MGZTKV6 2.5 has run very hot of late and after investigation and testing showed no problems with the engine we have found the problem to be the coolant tank cap. Seemed unlikely so unlikely it wasn't considered initially and was discovered by process of elimination. A cap has been fitted supplied by Xpart and the temperatures are now spot on. One to consider if anyone has an overheating/hot running KV6. Chris.S.
|
13th September 2019, 09:59 | #2 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,344
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Thanks for posting this Chris. It's always useful to remind members of this (as well as correct operation of the cooling fan) before the subject of head gasket failure rears its ugly head.
Sometimes however, it's just the two 'O' ring seals mounted on the expansion tank cap which flatten. They're not available separately from X-Part but something suitable can be obtained cheaply. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
13th September 2019, 10:34 | #3 | |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Quote:
I fitted a brand new LR cap and the rings went flat straight away (these were standard rings, not Jack's Viton rings). Over-tightening the cap can almost certainly flatten the rings but I'd made sure not turn it past the first 'bite point' - and they still got flattened. The owners manual page 145 says this: Ensure the cap is tightened fully after top-up is completed. It doesn't say what fully tight is and it doesn't mention over-tightening. So it's difficult to know how much to tighten the cap on this car. Every other car I've had you just screwed the cap on until it wouldn't turn any further (i.e. it came up against the stops). The 75's cap seems to keep turning for much longer before anything mechanical stops it. Why? |
|
13th September 2019, 10:49 | #4 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,912
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Because it's spinning/tightening against the top washer, compressing it too far. I always apply vaseline to the rings and tighten just enough, and I have a 1.8
|
13th September 2019, 10:53 | #5 |
I really should get out more.......
Rover 75 connoisseur se v6 auto Join Date: May 2014
Location: Hull
Posts: 2,063
Thanks: 1,842
Thanked 623 Times in 469 Posts
|
In my 1.8t i swop out the cap every 12 months -
__________________
She came off the Longbridge Line on 20-05-2003 The Silver Machine was the 13th of 160 Rover 75's to come off the production line that day and is the 100th of 527 Starlight Silver Rover 75 2.5 V6 Connoisseur SE Auto saloons listed in the build records produced world wide. |
13th September 2019, 11:10 | #6 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
|
13th September 2019, 11:30 | #7 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,912
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
|
13th September 2019, 11:39 | #8 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
|
13th September 2019, 12:45 | #9 |
Posted a thing or two
MGZT Join Date: Jul 2015
Location: Berkshire
Posts: 1,281
Thanks: 1,738
Thanked 299 Times in 216 Posts
|
Simon, "how tight is tight enough"? that was one of the questions asked of me, my answer was "not too tight" I have just checked my cap for the first time since getting the car back and it is tighter than I had it! It is on until it stopped! Regarding rings I have three old caps and none of them have flattened "o" rings? the last two fitted before the present Xpart were on the car when it ran very hot, so where does that take us " not too tight"? The first cap was on the car when I purchased it and at that time it had been tested because it was "spitting out white stuff from the headertank?cap? I had a long conversation with either T Cut, SD1too,or suzublu about this problem and read and absorbed a very erudite post on Coolant caps, SG1too - ? I am now going to examine the Xpart cap to see what it has on/or not on it comparable to the previous caps. I have already done this but forgot what was on it!!!! Chris S.
|
13th September 2019, 13:07 | #10 |
Posted a thing or two
MGZT Join Date: Jul 2015
Location: Berkshire
Posts: 1,281
Thanks: 1,738
Thanked 299 Times in 216 Posts
|
Im back, bit of a walk downstairs through the garden and garage to the drive(you feeling sorry for me)? No, ok The cap looks like any other, on the top embossed safety advice and in the centre 140, turn it over and the following round the bottom rim- PA 66 GF 30.now the orange part has a rectangle with No, repeat No number 140, but round the periphery REUTTER. N None of the other had this name on them but did have 140 in the rectangle. I think apart from possible faulty caps my problem has been "not tight enough" never been told that before but however Im inclined to favour Page 145 " ensure the cap is tightened fully" What do you think? I will run as I am and report back as soon as there is anything to report. Chris .S.
|
|
|